OMAP-L137 USB1.1 OHCI initialization sequence

RKD

Hi,

I am not able to initalize OHCI port of OMAPL137 EVM Board RevD. Can I know what are the registers and their bits need to be programmed to make it operational, with sequence?

Best Regards

RKD

over 15 years ago

0 swami over 15 years ago

TI__Expert 7435 points

Hi,

Pl. refer to the Linux OHCI driver that is shipped as part of the OMAPL13x sdk for the initialization steps. Specifically pl. refer to ohci-da830.c file in "drivers/usb/host" directory.

regards

swami

0 Jonathan Goldsmith over 15 years ago in reply to swami

Prodigy 130 points

How about for the (as it seems that TI views) 2 or 3 of us in the world who do not use Linux on the OMAP L137 and as such do not have the driver files you are talking about?

Processors

Processors forum

OMAP-L137 USB1.1 OHCI initialization sequence