About AM335x System Trace

Hi g.f,

This link leads to an empty page at the moment.

Hi Biser,

Thank you for the reply.

Can you try to see the following TI wiki Link:

http://processors.wiki.ti.com/index.php/Using_System_Trace_(STM)#Instrumenting_STM_SW_Messages_in_your_Application

If you can't see this page, please try searching "Using System Trace (STM)" from TI Wiki.

By the way, if System Trace is not supported yet for AM335x, when it will be supported? Is there plan?

For now, I guess only "Trace(Introduction Trace)" are supported for AM335x.

best regards,

g.f.

Yes, this is correct. As for plans I cannot say, you will need to contact TI offline to get an answer for this.

Hi Biser,

Thank you for the reply.

I'm so sorry but please let me again to make me sure.

>Yes, this is correct.

Do you mean that System Trace are not supported for AM335x yet,

and to use System Trace the CtoolLib is needed?

For CtoolLib support plan, I will contact to my local TI FAE.

Thank you.

best regards,

g.f.

Hi Biser,

Thank you for the reply.

Yes, I understood.

Introduction Trace which I mentioned before uses this ETB

and this Trace is the only method AM335x support currently.

I will ask my local TI FAE when AM335x will support the System Trace.

best regards,

g.f.