SRIO device init

Aswathy Raj

Hello,

We are new to CCS and TI's platform. We tried executing the LTE DL example given with MCSDK in simulator mode.

(TI6618 functional simulator). But SRIO is not getting initialized properly (SrioDevice_init() :- Control is not returning from this function). SRIO won't work in simulator mode ??

Regards and thanks,

Aswathy

over 11 years ago

0 Raja over 11 years ago

TI__Guru* 81335 points

Hi Aswathy,

TCI66xx devices such as TCI6618 are supported directly through Local Field Applications Engineers (FAEs.) These devices are not supported on the E2E forum. Please contact your local FAE for support of these devices. If you are not sure who your local FAE is, then please contact your local technical sales representative and they will be able to put you in contact with your local FAE.

For simulator related question, please post on CCS Forum. Please refer below thread which may help you.

http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/319272/1111131.aspx#1111131

Thanks.

Processors

Processors forum

SRIO device init