Interfacing BT - Audio Cape to Beaglebone or Any alternative EDK.

hrishikesh choudhary

Hi All,

I am trying to get hands on Bluetooth & audio drivers. I am trying to make up setup with Beaglebone. I have beaglebone Black.

Can anyone suggest which capes are compatible with beaglebone for BT & Audio.

Or can you suggest any low cost EDK board through which i can start immediately Playing with audio and BT .

Please guide !! waiting for your responses.

over 11 years ago

0 Biser Gatchev-XID over 11 years ago

TI__Guru**** 393215 points

For BB Black cape support please look at: http://elinux.org/Beagleboard:BeagleBone_Capes

The AM335X Starter Kit has both WLAN+Bluetooth and Audio codec: http://www.ti.com/tool/tmdssk3358

0 hrishikesh choudhary over 11 years ago in reply to Biser Gatchev-XID

Expert 1390 points

Is there any other option ... which is low cost .. and has only audio or only BT.

0 Biser Gatchev-XID over 11 years ago in reply to hrishikesh choudhary

TI__Guru**** 393215 points

The BB Black is the lowest cost option.

0 hrishikesh choudhary over 11 years ago in reply to Biser Gatchev-XID

Expert 1390 points

BUT Beaglebone black again requires all extra capes.. thanks

0 Rogerio Almeida over 11 years ago in reply to hrishikesh choudhary

TI__Mastermind 26215 points

Biser response was correct: these are the options you have. There is no other low cost EVM or low cost board that meet you needs besides these two. You can check cost of both options and decides which one is better for your project.

0 hrishikesh choudhary over 11 years ago in reply to Rogerio Almeida

Expert 1390 points

thanks biser !! thanks for your interest

Processors

Processors forum

Interfacing BT - Audio Cape to Beaglebone or Any alternative EDK.