• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 99 subscribers
  • Views 239 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

don't see "bootme"

mahdi parhizkari
Intellectual 370 points

Hi

I have a new system based on omapl137evm with a MT29F4G08ABAD-WP NANDFLASH and IS42S16160D-6BLI SDRAM and TCXO 24MHZ.

i connected to the omapl137 correctly.

i set the bootmode to debugmode and i tested uart2 with below example and every thing is ok : 

C:\Program Files\Texas Instruments\pspdrivers_01_30_00_05\packages\ti\pspiom\examples\evmOMAPL137\uart

when i changed the bootmode to uart2mode i don't see "bootme". 

Please help me to solve this problem?

Thank you