• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 530 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Support for Lauterbach set-up

Dattatraya Patil
Prodigy 10 points

Hello All, 

I am very new to debugging stuff  and I want to debug the OMAP5 with the lauterbash. 

I have OMAP5 Panda board and also I have the lauterbash, so can one please point me to a link that explain how to set-up the PC to debug via lauterbash. I have downloaded the latest android source code for the board, now is that I need to know how to install trace 32 and set-up a connection with board.

Thanks,

Dattatraya

 

  • 0
    TI__Guru**** 161600 points

    Hello Dattatraya,

    You can find the appropriate training materials on Lauterbach website www.lauterbach.com click on Support in menu list on the left of the web page. 

    Additional trainings I found are:

    http://omappedia.org/wiki/PandaBoard_JTAG_Debugging#Lauterbach_tool_connection:

    http://www.lauterbach.com/tutorial.pdf

    http://www2.lauterbach.com/pdf/debugger_user.pdf

    http://www2.lauterbach.com/pdf/general_ref_d.pdf

    http://www2.lauterbach.com/pdf/ide_user.pdf

    Hope this helps.

    Best Regards,

    Yordan