TMS320C6655/57 ORCAD Capture Library Files

Guy Menard

Other Parts Discussed in Thread: TMS320C6655

I have downloaded the TMS320C6655/57 ORCAD Capture Library Files but I can't convert them to Altium Designer (tried in 2 different versions of Altium) because it says that the file is not recognized, as if there was an error in the file.

I would like to have the symbol and footprint to make my design in Altium. Can anyone help?

over 11 years ago

0 Raja over 11 years ago

TI__Guru* 81335 points

Hi Guy,

Please refer post from "Tom" below,

http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/226148/796627.aspx#796627

I think we provide only ORCAD.

Thank you.

0 Guy Menard over 11 years ago in reply to Raja

Prodigy 50 points

I know that TI only provides Orcad symbol, what I am saying is that there seems to be something wrong with the symbol. Can you verify that the symbol for the TMS320C6655/57 actually works in Orcad?

I have been able to import many other symbols and schematics and only this one gives me errors.

Also, since this is an E2E forum, maybe other engineers (not TI employees) have done the conversion or have made the symbol and could share?

Thank you.

0 Raja over 11 years ago in reply to Guy Menard

TI__Guru* 81335 points

Hi Guy,

I am working with expert to answer your query.

Thank you for bringing to our notice.

0 David (ASIC) Liu over 11 years ago in reply to Raja

TI__Guru**** 177301 points

Hi Guy

Can you see if you can unzip and import this symbol in Altium?

Thanks

David

C6657_ORCAD_SCHEMATIC_SYMBOL_72.7z

0 Guy Menard over 11 years ago in reply to David (ASIC) Liu

Prodigy 50 points

Hi David,

Yes. This one works.

Thanks a lot!

Guy

Processors

Processors forum

TMS320C6655/57 ORCAD Capture Library Files