Mistral EVM DM37x Rev G

laurent poyart

Other Parts Discussed in Thread: DM3730

Hi,

I'd like to run some benchmarks on the Mistral EVM DM37x Board, using the GPMC bus in burst mode from the C64x module. The EVM has the following equipments connected to the GPMC bus:

LAN9220 - 10/100 Mbps Ethernet interface
WLAN Daugther Board on the expansion connector

I'd like to know if those devices support GPMC burst mode or if there is any other possibility to enter in burst mode on this EVM.

Regards.

Laurent

over 10 years ago

0 Cvetolin Shulev-XID over 10 years ago

TI__Guru 65405 points

Hi Laurent,

The dm3730 processor supports GPMC burst mode. You can obtain more details about GPMC fron the Technical reference manual section 10.1 General-Purpose memory controller at the link:

http://www.ti.com/product/DM3730/technicaldocuments

Tsvetolin Shulev

0 laurent poyart over 10 years ago in reply to Cvetolin Shulev-XID

Prodigy 180 points

Hi,

Thanks for the answer. I already had a look at the technical documentation. I'd like to know if someone has already used the GPMC burst mode on the Mistral EVM board. I don't know if the devices connected on the GPMC are able to support this mode.

Regards.

Laurent

Processors

Processors forum

Mistral EVM DM37x Rev G