MT9D112

bojing zou

Hello all,

I am developing application on Lightcrafter DM365 EVM. Currently, I need upgrade the camera sensor from MT9V113 (which is supported by the firmware) to MT9D112 from Aptina.

The thing is I can't even find the "Register Reference" called by Aptina. At this stage, I don't know how to do. Does anyone have the MT9D112 Linux driver for DM365 EVM?

Thanks in advance

Martin

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Hi Martin,

You can get the MT9D112 camera driver from the below link.

http://lxr.free-electrons.com/source/drivers/staging/dream/camera/mt9d112.c?v=2.6.32

Also you have to modify the board file for i2c initialization with slave address.

0 bojing zou over 10 years ago in reply to Titusrathinaraj Stalin

Prodigy 190 points

Titusrathinaraj Stalin said:

Hi Martin,

You can get the MT9D112 camera driver from the below link.

http://lxr.free-electrons.com/source/drivers/staging/dream/camera/mt9d112.c?v=2.6.32

Also you have to modify the board file for i2c initialization with slave address.

Hello Titus S.

Thanks for your quick reply.

I am new to the linux driver programming and I am not sure what to do with the board file. Is there any guideline or tutorial for this?

Thanks

Regards

Martin