Processors

Processors forum

State Resolved
Locked Locked
Replies 4 replies
Subscribers 98 subscribers
Views 627 views
Users 0 members are here

Support feedback

Options

Options

Related

camlink interface

sesha rao

Prodigy 50 points

Hi

i would like to connect CAMLINK signals to Davincy Processor DM8148/DM8168 which one will support this feature straight away.
Can any body guide me reg this.

over 11 years ago

0 Steve Clynes over 11 years ago

TI__Mastermind 43875 points

You will need a bridge chip since neither of these processors support CameraLink directly.

BR,

Steve

0 sesha rao over 11 years ago in reply to Steve Clynes

Prodigy 50 points

Hi steve

thanks for the reply

can you please suggest the bridge chip which can give 24bit RGB video output, compatible to the DM8148.

0 Steve Clynes over 11 years ago in reply to sesha rao

TI__Mastermind 43875 points

Unfortunately I don't have any experience with CameraLink.

You might try contacting one of TI's partners such as Appro, who have a number of TI DM based camera systems and support many different sensor modules etc...

http://www.appropho.com/NewWeb/Main.php

BR,

Steve

0 sesha rao over 11 years ago in reply to Steve Clynes

Prodigy 50 points

thank you steve