Flash a RTSC project

Hi Lars,

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

Please take a look at below thread

http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/354771/1253899.aspx#1253899

Thanks,

Okay, I see, you make some bin file of it. And what to do then? How do I upload the bin file to my evaluation board?

Thanks in advance,

Lars

Those instructions are unclear. 

E.g. In the pdf: 
7.1 Set the EVM Dip switches
7.2 Set the Environment Variables
7.3 Copy the custom GEL files
7.4 DSS Script Arguments
7.5 Executing the DSS script to restore factory default images.

Where does the programming happen?

And in the readme.txt, where do I find the evmc66xx emulator target configuration?

Thanks in advance,
Lars

Hi Lars,

Program the binary file to NOR flash with the help of NOR write readme.txt file and refer section "4.3. Verifying NOR" on Program_evm_userguide.pdf to valitate the NOR boot.

Please take a look at chapter 1 on Keystone Multicore Workshop Lab Manual document. It should be help you for creating new target configuration file in CCS.

http://www.ti.com/lit/ml/sprp820/sprp820.pdf

Thanks,