[J6/AM57] How to handle the unused ECC pins for the EMIF module

Yaoming Qin

Expert 3280 points

Hi all,

My customer doesn't need to use the ECC function of the EMIF, so how to handle the unused pins?

Yaoming

Thanks!

over 10 years ago

0 Yordan Kovachev over 10 years ago

TI__Guru**** 161600 points

Hi Yaoming,

Since AM571x devices does not support ECC, I assume that your customer uses AM572x device, right?

The recommendation for unused balls is given in Section 4.1.1 Unused balls connection requirements of AM572x Data Manual.

Best Regards,

Yordan

Processors

Processors forum

[J6/AM57] How to handle the unused ECC pins for the EMIF module