• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 431 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

use McASP1 not McASP2 on our DM8148 board

bob lee
Genius 3210 points

Hi Pavel,

As you know, the default codec device on DM8148 board is tlv320aic3x and it use McASP2.

But the codec on our custom board use McASP1.

So I want to know how to change McASP2 to McASP1.

Would you give me some suggestions ?Thank you.

BR

Bob

  • 0
    TI__Guru**** 170625 points

    Bob,

    Please refer to the below wiki page:

    http://processors.wiki.ti.com/index.php/TI81xx_PSP_Porting_Guide#Audio_driver_.28McASP.29

    Also the below e2e threads might be in help:

    http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/t/255120.aspx

    http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/717/t/229575.aspx

    http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/t/246885.aspx

    http://e2e.ti.com/support/embedded/linux/f/354/t/148881.aspx

    Regards,
    Pavel