A problem About the BCP user guide

Bruce Lin1

Hi everyone,

Do you known more details information about the TM submodule Input Format and output Format in the table of "Table 4-3 TM Register Details (Part 7 of 7) " in the bcp user guide? What is the meaning of Reverse 32 bits and the input data endian is 128 bits? I find some documents and do not find anything information about this concepts in the TI documents, can you explain it for me?

Thank you very much!

over 10 years ago

0 Raja over 10 years ago

TI__Guru* 81335 points

Hi Bruce,

We are working with expert to answer this post. Thank you for your patience.

0 Nitin Sakhuja over 10 years ago in reply to Raja

TI__Mastermind 30405 points

Hi Bruce,

Please refer to Section 3.3 (Data Reformatting and Endian conversion) in the BCP user guide. Tables 3-2 to 3-4 depict the available bit-swaps (8-bit, 16-bit and 32-bit) and tables 3-5 to 3-7 refer to the available bit-reversals.

Regards

-Nitin

0 Bruce Lin1 over 10 years ago in reply to Nitin Sakhuja

Prodigy 140 points

Hi Nitin,

Thank you for help!

Processors

Processors forum

A problem About the BCP user guide