Interfacing with Matlab

Sukanya Karunakaran

Hi,

How can I interface TMDXEVM6678l to client side tools like matlab so that the board can send a script to matlab tool through ethernet and the code is executed at the backend using matlab at the client side and result is taken by the board?Or is it not possible?

Please let me know ...

Thankyou!

over 10 years ago

0 Raja over 10 years ago

TI__Guru* 81335 points

Hi,

We are not an expert on MATLAB to answer this post. Please post device/MCSDK related queries to support you better.

Thank you.

0 Pubesh over 10 years ago

TI__Mastermind 20790 points

Sukanya,

Your best way is to contact The MathWorks directly for client side tools like MATLAB support.
How are you transferring data between Matlab and the DSP? But I would suggest you strongly contacting the MathWorks.

0 Pubesh over 10 years ago in reply to Pubesh

TI__Mastermind 20790 points

Sukanya,

We are not support for matlab here. So this discussion of thread can helpful for future readers, If you verified this thread. You can comeback if you are getting issue related with MCSDK or keystone device support.

Processors

Processors forum

Interfacing with Matlab