OMAP-L138 BOOTMODE register's value

Steven Sharp Nelson

Hi,

Boot Mode:This reflects the state of the boot mode pins.

In my boards,The pins(BOOT[7:0]) value is 00001110,I use xds100v2 to connect the board and view the BOOTMODE register's value ,The value is all zero!!!,It can't understand,can every one explain this! reset and check the level of these pins，every method used does't work！！

over 10 years ago

0 Senthilkumar Srinivasan over 10 years ago

TI__Mastermind 43660 points

Hello Steven,

Are you using custom board or EVM ?

Are you sure the board is properly booted and you are not able to see the value in BOOTCFG register only ?

Regards,

Senthil

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Hi Steven,

In my boards,The pins(BOOT[7:0]) value is 00001110,I use xds100v2 to connect the board and view the BOOTMODE register's value ,The value is all zero!!!,It

Please check the PINMUX17 and PINMUX18 registers for BOOT mode pins, whether the pins configured any other peripheral ?

Processors

Processors forum

OMAP-L138 BOOTMODE register's value