Problem with load program into CCS

Oleg Borovikov

Other Parts Discussed in Thread: TMS320C6678, SYSBIOS

Hi all,
I do not know whose competence to treat my question.
I use TMS320C6678 with emulator SEED-XDS5560v2 and ccs v5.2
This poject on C
I attempted connect NDK stack with my project and I received message
in CCS after connect project where I make command "Load Programm"
No source available for "0xbff6fa8" - for Core 0
No source available for "0x800080" - for Core 1 etc.

My .cfg file below

var Program = xdc.useModule('xdc.cfg.Program');
var Memory = xdc.useModule('xdc.runtime.Memory');
var BIOS = xdc.useModule('ti.sysbios.BIOS');
var HeapMem = xdc.useModule('ti.sysbios.heaps.HeapMem');
var HeapBuf = xdc.useModule('ti.sysbios.heaps.HeapBuf');
var Log = xdc.useModule('xdc.runtime.Log');
var Task = xdc.useModule('ti.sysbios.knl.Task');

Task.common$.namedInstance = true;
var Clock = xdc.useModule ('ti.sysbios.knl.Clock');
var Cache = xdc.useModule('ti.sysbios.family.c66.Cache');
var Sem = xdc.useModule ('ti.sysbios.knl.Semaphore');
var Hwi = xdc.useModule ('ti.sysbios.hal.Hwi');
var Ecm = xdc.useModule ('ti.sysbios.family.c64p.EventCombiner');

var Csl = xdc.loadPackage('ti.csl');

var Cppi = xdc.loadPackage('ti.drv.cppi');

var Qmss = xdc.loadPackage('ti.drv.qmss');

var Pa = xdc.loadPackage('ti.drv.pa');

var PlatformLib = xdc.loadPackage('ti.platform.evmc6678l');

var System = xdc.useModule('xdc.runtime.System');
SysStd = xdc.useModule('xdc.runtime.SysStd');
System.SupportProxy = SysStd;

var Global = xdc.useModule('ti.ndk.config.Global');
Global.enableCodeGeneration = false;
Global.IPv6 = false;

var heapMemParams1 = new HeapMem.Params;
heapMemParams1.size = 8192 * 30;
heapMemParams1.sectionName = "systemHeap";
Program.global.heap0 = HeapMem.create(heapMemParams1);

Memory.defaultHeapInstance = Program.global.heap0;

Program.sectMap["systemHeap"] = Program.platform.stackMemory;

BIOS.taskEnabled = true;

Program.sectMap["systemHeap"] = "DDR3";
Program.sectMap[".bss"] = "DDR3";
Program.sectMap[".const"] = "DDR3";
Program.sectMap[".text"] = "DDR3";
Program.sectMap[".far"] = "DDR3";
Program.sectMap[".cinit"] = "DDR3";
Program.sectMap[".switch"] = "DDR3";
Program.sectMap[".vecs"] = "DDR3";
Program.sectMap[".cio"] = "DDR3";
Program.sectMap[".fardata"] = "DDR3";
Program.sectMap[".rodata"] = "DDR3";
Program.sectMap[".neardata"] = "DDR3";
Program.sectMap[".data"] = "DDR3";
Program.sectMap["platform_lib"] = "DDR3";

Program.sectMap[".stack"] = "L2SRAM";
Program.sectMap[".qmss"] = "L2SRAM";
Program.sectMap[".cppi"] = "L2SRAM";

Program.sectMap[".sharedDDR"] = "MSMCSRAM";
Program.sectMap[".cppiMemTX"] = "MSMCSRAM";
Program.sectMap[".cppiMemRX"] = "MSMCSRAM";

I include libraries
ti/ndk_2_21_01_38/packages/ti/ndk/os/lib.os.ae66
ti/ndk_2_21_01_38/packages/ti/ndk/netctrl/lib/netctrl.ae66
ti/ndk_2_21_01_38/packages/ti/ndk/hal/timer_bios/lib/hal_timer_bios.ae66
ti/ndk_2_21_01_38/packages/ti/ndk/stack/lib/stk6_nat.ae66

over 10 years ago

0 Pubesh over 10 years ago

TI__Mastermind 20790 points

Oleg,

I hope, there is no issue to connect, load and run the application on the target using emaultor, gel and CCS.

For EVM hardware setup, refer this wiki,

http://processors.wiki.ti.com/index.php/TMDXEVM6678L_EVM_Hardware_Setup

MCSDK User gudie: http://processors.wiki.ti.com/index.php/BIOS_MCSDK_2.0_User_Guide
http://processors.wiki.ti.com/index.php/BIOS_MCSDK_2.0_Getting_Started_Guide

Please test and understand the NDK based example avilable in the mcsdk, this will be easy to understand the network example.
This test code is implemented to run on the core0(master core), You need to modify the NIMU driver code as well as application code,if you wish to run this code on core1. This implementation is discussed already in the following E2E post, How to run the client_evmc6670 other than core0
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/p/165415/858287.aspx#858287
http://e2e.ti.com/support/dsp/c6000_multi-core_dsps/f/639/t/167588.aspx

Please share the project to check and provide technical suggestion, if you created new set of code or more modification the TI test code.

0 Pubesh over 10 years ago in reply to Pubesh

TI__Mastermind 20790 points

Oleg,

I have tested the helloworld ndk based example on the EVM, see the snaphot here.

0 Oleg Borovikov over 10 years ago in reply to Pubesh

Expert 1280 points

Hi Pubesh,
Thank for your answer!
I found my error. I wrote small project with only invoked NC_SystemOpen and Qmss and Cppi init. If I don't use DDR3 - all works correctly. But as only I use DDR3 - I receive error - No source available for "xxxx". Error is contains to my gel file. I must change DDR3 inititialization. I did not work with gel file before.
Thank you for help.
Best regards,
Oleg

0 Pubesh over 10 years ago in reply to Oleg Borovikov

TI__Mastermind 20790 points

Oleg,

Glad to hear, Its working on your side and thanks sharing the details here. However this discussion of thread can helpful for future readers, If you verified this thread.

0 Oleg Borovikov over 10 years ago in reply to Pubesh

Expert 1280 points

Hi Pubesh,
I took standard gel file for my DSP - evmc6678l.gel and edited next strings
number text file
line
101 #define PLL1_M 33
102 #define PLL1_D 2

. . . .
107 #define REF_CLOCK_KHZ 122800

. . . .
2415 DDR_SDTIM1 = 0x1113783C;

. . . .
2425 DDR_SDTIM2 = 0x30b37fe3;

. . . .
2435 DDR_SDTIM3 = 0x559F8adf;

. . . .
2480 DDR_SDRFC = 0x00001458;

and my very small project was to work.
I am not sure that would be enough for full project.
Maybe it will help someone
Thank you for your help.
Oleg

Processors

Processors forum

Problem with load program into CCS