GLSDK building issue

Vaibhav,

It is recommended that you do ./setup.sh after exporting GLSDK environment variable to point to the GLSDK installation directory.

What this would do is, it would run bin/setup-package-install.sh which will install all the pre-requisite packages. Have you already done this?

Just want to rule out the possibility of missing packages before proceeding to debug this further.

Can you please confirm this or try this suggestion and then invoke the build-core-sdk?

Regards

Karthik

Hi Karthik,

Yes I have done the setup.sh. It is giving the same error.

Please find following log.

vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$ ./setup.sh

--------------------------------------------------------------------------------
TISDK setup script

This script will set up your development host for sdk development.
Parts of this script require administrator priviliges (sudo access).
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
Verifying Linux host distribution
Ubuntu 12.04 found successfully, continuing..
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will make sure you have the proper host support packages installed
using the following command: sudo apt-get install xinetd tftpd nfs-kernel-server minicom build-essential libncurses5-dev uboot-mkimage autoconf automake python git diffstat texinfo gawk chrpath subversion dos2unix m2crypto

Note! This command requires you to have administrator priviliges (sudo access)
on your host.
Press return to continue

[sudo] password for vaibhav:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Note, selecting 'python-m2crypto' instead of 'm2crypto'
autoconf is already the newest version.
automake is already the newest version.
chrpath is already the newest version.
diffstat is already the newest version.
gawk is already the newest version.
git is already the newest version.
libncurses5-dev is already the newest version.
python-m2crypto is already the newest version.
texinfo is already the newest version.
uboot-mkimage is already the newest version.
xinetd is already the newest version.
dos2unix is already the newest version.
minicom is already the newest version.
tftpd is already the newest version.
subversion is already the newest version.
build-essential is already the newest version.
nfs-kernel-server is already the newest version.
python is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Package verification and installation successfully completed
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
In which directory do you want to install the target filesystem?(if this directory does not exist it will be created)
Ensure that complete path is provided, otherwise NFS path in bootargs might be incomplete
[ /home/vaibhav/targetfs ] /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will extract the target filesystem to /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs

Note! This command requires you to have administrator priviliges (sudo access)
on your host.
Press return to continue
/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs already exists
(r) rename existing filesystem (o) overwrite existing filesystem (s) skip filesystem extraction
[r] o
Old /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs removed
Please wait while extracting NFS filesystem...

Successfully extracted arago-glsdk-multimedia-image-dra7xx-evm.tar.gz to /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will update the EXEC_DIR variables in the Rules.make file
This will facilitate the SDK to install (with make install) rebuilt binaries in
/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs/home/root/dra7xx

The files will be available from /home/root/dra7xx on the target.

This setting can be changed later by editing Rules.make and changing the
EXEC_DIR variable.

Press return to continue
Rules.make edited successfully..
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will export your target filesystem for NFS access.

Note! This command requires you to have administrator priviliges (sudo access)
on your host.
Press return to continue
/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs already NFS exported, skipping..
--------------------------------------------------------------------------------
This step will create boot.script and update boot.scr acordingly
Press return to continue
Image Name: Boot Image
Created: Wed Dec 10 11:05:14 2014
Image Type: ARM Linux Script (uncompressed)
Data Size: 366 Bytes = 0.36 kB = 0.00 MB
Load Address: 00000000
Entry Point: 00000000
Contents:
Image 0: 358 Bytes = 0.35 kB = 0.00 MB
Updating boot.script.nfs and boot.scr.nfs
--------------------------------------------------------------------------------
Restarting NFS and TFTP server

* Stopping NFS kernel daemon [ OK ]
* Unexporting directories for NFS kernel daemon... [ OK ]
* Exporting directories for NFS kernel daemon... exportfs: Failed to stat /home/vaibhav/home/miracast/ti-glsdk_dra7xx-evm_6_10_00_02/targetfs: No such file or directory
[ OK ]
* Starting NFS kernel daemon [ OK ]
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will set up minicom (serial communication application) for
SDK development


For boards that contain a USB-to-Serial converter on the board (BeagleBone),
the port used for minicom will be automatically detected. By default Ubuntu
will not recognize this device. Setup will add a udev rule to
/etc/udev/ so that from now on it will be recognized as soon as the board is
plugged in.

For other boards, the serial will defualt to /dev/ttyUSB0. Please update based
on your setup.
--------------------------------------------------------------------------------


NOTE: For boards with a built-in USB to Serial adapter please press
ENTER at the prompt below. The correct port will be determined
automatically at a later step. For all other boards select
the serial port that the board is connected to
Which serial port do you want to use with minicom?
[ /dev/ttyUSB0 ]

Copied existing /home/vaibhav/.minirc.dfl to /home/vaibhav/.minirc.dfl.old

Configuration saved to /home/vaibhav/.minirc.dfl. You can change it further from inside
minicom, see the Software Development Guide for more information.
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
This step will set up the u-boot variables for booting the EVM.
Select Linux kernel location:
1: SD card

[ 1 ]

Select root file system location:
1: SD card
2: NFS

[ 1 ]

Resulting u-boot variable settings:

setenv baudrate 115200
fatload mmc 0:1 0x825f0000 dra7-evm.dtb
fatload mmc 0:1 0x80300000 uImage
setenv bootargs 'elevator=noop console=ttyO0,115200n8 earlyprintk root=/dev/mmcblk0p2 rw rootwait fixrtc'
setenv fdt_high 0x84000000
bootm 0x80300000 - 0x825f0000
--------------------------------------------------------------------------------

--------------------------------------------------------------------------------
To use the SDK, you need to have Linaro cross compiler toolchain installed
Do you want to install it now Y/n
[ y ]n
--------------------------------------------------------------------------------
WARNING!! ./bin/repo already exists
--------------------------------------------------------------------------------
This step will download ducati build tools
The following components will be downloaded from the specified locations:

Framework Components:
http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/fc
Codec Engine:
http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/ce
XDAIS:
http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/xdais
SYSBIOS:
http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/bios/sysbios
XDCTools:
http://downloads.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/rtsc/
You must agree and abide to respective license terms in order to continue.
Please refer to individual manifest files for license information.
Do you want to download all the ducati build tools? y/N
[ n ]
Do you want to fetch all the sources y/N
[ n ]

GLSDK setup completed!
Please continue reading the Software Developer's Guide for more information on
how to develop software on the EVM
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$ ./bin/setup-yocto.sh
[GLSDK]>
[GLSDK]> Testing for yocto-layers
[GLSDK]> yocto-layers is present. Proceed to next step
[GLSDK]> Copying yocto build-scripts to yocto-layers
[GLSDK]> cd yocto-layers
[GLSDK]> cp ../config/*.* configs/glsdk/.
[GLSDK]>
[GLSDK]> Completed Yocto setup. You can now build using Yocto
[GLSDK]>
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02$ cd yocto-layers/
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$ ls -l
total 72
drwxrwxr-x 6 vaibhav vaibhav 4096 Dec 10 09:12 build
-rwxrwxr-x 1 vaibhav vaibhav 1285 Dec 10 11:05 build-core-sdk.sh
-rwxrwxr-x 1 vaibhav vaibhav 682 Dec 10 11:05 build-specific-recipe.sh
-rwxrwxr-x 1 vaibhav vaibhav 486 Dec 10 11:05 clean-specific-recipe.sh
drwxrwxr-x 6 vaibhav vaibhav 4096 Dec 9 22:19 configs
drwxrwxr-x 5 vaibhav vaibhav 20480 Dec 10 10:56 downloads
-rwxrwxr-x 1 vaibhav vaibhav 24520 Dec 9 22:19 oe-layertool-setup.sh
drwxrwxr-x 3 vaibhav vaibhav 4096 Dec 9 22:19 sample-files
drwxrwxr-x 10 vaibhav vaibhav 4096 Dec 10 09:10 sources
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$ ./build-core-sdk.sh dra7xx-evm
In which directory do you want to place the downloads for the Yocto build ?(if this directory does not exist it will be created)
Ensure that complete path is provided.
[ /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/downloads ]
[GLSDK]>
[GLSDK]> Current Directory is /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers
[GLSDK]> PATH is /usr/local/cuda-6.5/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/cuda-6.5/bin:/usr/local/cuda-6.5/bin:/home/vaibhav/home/miracast_display/linaro_cross_compiler/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin:/home/vaibhav/home/miracast_display/linaro_cross_compiler/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/arm-linux-gnueabihf/bin/
[GLSDK]> Building on CPU-194 running Linux CPU-194 3.5.0-54-generic #81~precise1-Ubuntu SMP Tue Jul 15 04:02:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[GLSDK]> Starting Yocto build at Wed Dec 10 11:06:00 IST 2014
[GLSDK]>
[GLSDK]> ./oe-layertool-setup.sh -f configs/glsdk/glsdk-6.10.00.02-config.txt
/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers


cloning repo bitbake

Fetching origin
Switched to branch '1.20'
Already up-to-date.
Note: checking out '3bb3f1823bdd46ab34577d43f1e39046a32bca77'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 3bb3f18... fetch2/__init__.py: let try_mirror_url return correct value


cloning repo meta-glsdk

Fetching origin
Switched to branch 'dora'
Already up-to-date.
Note: checking out 'e1b48fc60cd16ba7a12c1d0394901c0152c26f76'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at e1b48fc... dspdce: Updated binary location


cloning repo meta-arago

Fetching origin
M meta-arago-distro/conf/distro/arago.conf
Switched to branch 'dora'
Already up-to-date.
M meta-arago-distro/conf/distro/arago.conf
Note: checking out 'fb6e3d530f71a533bea720eca091002fd772e8e1'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at fb6e3d5... wl18xx: scripts: update scripts to match OOB configuration


cloning repo meta-qt5

Fetching origin
Switched to branch 'dora'
Already up-to-date.
Note: checking out '5b5616b63bdf163ea3eb2ca8857c56a393435fe3'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 5b5616b... licenses: rename NOKIA-TPLA-2.4 to DIGIA-TPLA-2.4


cloning repo meta-openembedded

Fetching origin
Previous HEAD position was ee17367... cloud9: Fix branch param
Switched to branch 'dora'
Already up-to-date.
Note: checking out 'ee173678383683e972c7d4d6f0ef5790bfa50274'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at ee17367... cloud9: Fix branch param


cloning repo meta-ti

Fetching origin
Switched to branch 'dora'
Already up-to-date.
Note: checking out 'd1578c08bdf114bc0f1606c65bd39f0c8293c562'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at d1578c0... u-boot-ti-staging:_2013.10: Update to pull in critical fixes


cloning repo meta-linaro

Fetching origin
M meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb
Switched to branch 'dora'
Already up-to-date.
M meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb
Note: checking out '2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 2d06310... linux-linaro-aarch64: use ;nobranch=1


cloning repo oe-core

Fetching origin
Previous HEAD position was 5c51dd2... qt4: Fix Qt 4.8.5 source to new location
Switched to branch 'dora'
Already up-to-date.
Note: checking out '5c51dd2e9bab54013652475888554bc4660dcff3'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 5c51dd2... qt4: Fix Qt 4.8.5 source to new location


################################################################################
The bblayers.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/bblayers.conf
file for correctness.

NOTE: Any additional entries to this file will be lost if the ./oe-layertool-setup.sh
script is run again. To add entries permanently to this file
please add them to the config file used and rerun the
./oe-layertool-setup.sh script.



################################################################################
The local.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/local.conf
file for correctness.

By default the number of threads used by the build is set to the number
of CPUs found on your system.

NOTE: You will probably want to change the default MACHINE setting in the
local.conf file to the machine you are trying to build.

WARNING: Found existing /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/conf/local.conf
Saving a backup to /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/conf/local.conf.bak


################################################################################
A setenv file has been created for you in the conf directory. Please verify
The contents of this file. Once you have verified the contents please source
this file to configure your environment for building:

. conf/setenv

You can then start building using the bitbake command. You will likely want
to set the MACHINE option if you have not done so in your local.conf file.

For example:
MACHINE=xxxxx bitbake <target>

Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support
[GLSDK]> cd build
[GLSDK]> . conf/setenv
[GLSDK]> cp conf/local.conf conf/local.conf.pristine
[GLSDK]> echo ARAGO_BRAND = "glsdk" >> conf/local.conf
[GLSDK]> MACHINE=dra7xx-evm bitbake arago-glsdk-multimedia-image
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x5c84d50>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x2ef3fd0>)
IndexError: list index out of range

Loading cache: 100% |############################################################################################################| ETA: 00:00:00
Loaded 2124 entries from dependency cache.
Parsing recipes: 100% |##########################################################################################################| Time: 00:00:01
Parsing of 1714 .bb files complete (1703 cached, 11 parsed). 2124 targets, 106 skipped, 0 masked, 0 errors.
WARNING: No recipes available for:
/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-arago/meta-arago-distro/recipes-kernel/linux/linux-ti-staging_3.8.bbappend
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "dra7xx-evm"
DISTRO = "arago"
DISTRO_VERSION = "2013.10"
TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard cortexa15"
TARGET_FPU = "vfp-neon"
meta-glsdk = "(nobranch):e1b48fc60cd16ba7a12c1d0394901c0152c26f76"
meta-arago-distro
meta-arago-extras = "(nobranch):fb6e3d530f71a533bea720eca091002fd772e8e1"
meta-qt5 = "(nobranch):5b5616b63bdf163ea3eb2ca8857c56a393435fe3"
toolchain-layer
meta-networking
meta-ruby
meta-oe = "(nobranch):ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ti = "(nobranch):d1578c08bdf114bc0f1606c65bd39f0c8293c562"
meta-linaro-toolchain = "(nobranch):2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2"
meta = "(nobranch):5c51dd2e9bab54013652475888554bc4660dcff3"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x57c57d0>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x226a190>)
IndexError: list index out of range

ERROR: Function failed: do_compile (log file is located at /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/temp/log.do_compile.7407)
ERROR: Logfile of failure stored in: /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/temp/log.do_compile.7407
Log data follows:
| DEBUG: Executing shell function do_compile
| NOTE: make -j 4
| make all-recursive
| make[1]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1'
| Making all in build-aux
| make[2]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/build-aux'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/build-aux'
| Making all in po
| make[2]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/po'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/po'
| Making all in runtime-po
| make[2]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/runtime-po'
| make[2]: Nothing to be done for `all'.
| make[2]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/runtime-po'
| Making all in lib
| make[2]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/lib'
| make all-am
| make[3]: Entering directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/lib'
| gcc -std=gnu99 -I. -I../intl -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -O2 -pipe -c yyerror.c
| gcc -std=gnu99 -I. -I../intl -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -O2 -pipe -c argmatch.c
| gcc -std=gnu99 -I. -I../intl -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -O2 -pipe -c binary-io.c
| gcc -std=gnu99 -I. -I../intl -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -isystem/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/sysroots/x86_64-linux/usr/include -O2 -pipe -c close-stream.c
| In file included from argmatch.c:28:0:
| ./stdio.h:1015:1: error: 'gets' undeclared here (not in a function)In file included from close-stream.h:1:0,
| from close-stream.c:20:
| ./stdio.h:1015:1: error: 'gets' undeclared here (not in a function)
|
| make[3]: *** [argmatch.o] Error 1
| make[3]: *** Waiting for unfinished jobs....
| make[3]: *** [close-stream.o] Error 1
| In file included from yyerror.c:22:0:
| ./stdio.h:1015:1: error: 'gets' undeclared here (not in a function)In file included from binary-io.h:26:0,
| from binary-io.c:3:
| ./stdio.h:1015:1: error: 'gets' undeclared here (not in a function)
|
| make[3]: *** [yyerror.o] Error 1
| make[3]: *** [binary-io.o] Error 1
| make[3]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/lib'
| make[2]: *** [all] Error 2
| make[2]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1/lib'
| make[1]: *** [all-recursive] Error 1
| make[1]: Leaving directory `/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/bison-2.7.1'
| make: *** [all] Error 2
| ERROR: oe_runmake failed
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_compile (log file is located at /home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/x86_64-linux/bison-native/2.7.1-r0/temp/log.do_compile.7407)
ERROR: Task 837 (virtual:native:/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/oe-core/meta/recipes-devtools/bison/bison_2.7.1.bb, do_compile) failed with exit code '1'
NOTE: Tasks Summary: Attempted 294 tasks of which 287 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
virtual:native:/home/vaibhav/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/oe-core/meta/recipes-devtools/bison/bison_2.7.1.bb, do_compile
Summary: There was 1 WARNING message shown.
Summary: There were 3 ERROR messages shown, returning a non-zero exit code.
[GLSDK]>
[GLSDK]> Completed Yocto build at Wed Dec 10 11:06:49 IST 2014
[GLSDK]>
vaibhav@CPU-194:~/home/miracast_display/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$

Hi karthik,

I made a new setup of GLSDK. Now I am getting following errors.

 

vaibhav@CPU-194:~/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$

vaibhav@CPU-194:~/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$ ./build-core-sdk.sh dra7xx-evm

In which directory do you want to place the downloads for the Yocto build ?(if this directory does not exist it will be created)

Ensure that complete path is provided.

[ /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/downloads ]

[GLSDK]>

[GLSDK]> Current Directory is /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers

[GLSDK]> PATH is /usr/local/cuda-6.5/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/cuda-6.5/bin:/usr/local/cuda-6.5/bin:/home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/bin/:/home/vaibhav/home/miracast_new/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin/:/home/vaibhav/home/miracast_new/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/arm-linux-gnueabihf/bin/

[GLSDK]> Building on CPU-194 running Linux CPU-194 3.5.0-54-generic #81~precise1-Ubuntu SMP Tue Jul 15 04:02:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux

[GLSDK]> Starting Yocto build at Wed Dec 10 16:03:01 IST 2014

[GLSDK]>

[GLSDK]> ./oe-layertool-setup.sh -f configs/glsdk/glsdk-6.10.00.02-config.txt

/home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers

cloning repo bitbake

Fetching origin

Switched to branch '1.20'

Already up-to-date.

Note: checking out '3bb3f1823bdd46ab34577d43f1e39046a32bca77'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at 3bb3f18... fetch2/__init__.py: let try_mirror_url return correct value

cloning repo meta-glsdk

Fetching origin

Switched to branch 'dora'

Already up-to-date.

Note: checking out 'e1b48fc60cd16ba7a12c1d0394901c0152c26f76'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at e1b48fc... dspdce: Updated binary location

cloning repo meta-arago

Fetching origin

Switched to branch 'dora'

Already up-to-date.

Note: checking out 'fb6e3d530f71a533bea720eca091002fd772e8e1'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at fb6e3d5... wl18xx: scripts: update scripts to match OOB configuration

cloning repo meta-qt5

Fetching origin

Switched to branch 'dora'

Already up-to-date.

Note: checking out '5b5616b63bdf163ea3eb2ca8857c56a393435fe3'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at 5b5616b... licenses: rename NOKIA-TPLA-2.4 to DIGIA-TPLA-2.4

cloning repo meta-openembedded

Fetching origin

Previous HEAD position was ee17367... cloud9: Fix branch param

Switched to branch 'dora'

Already up-to-date.

Note: checking out 'ee173678383683e972c7d4d6f0ef5790bfa50274'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at ee17367... cloud9: Fix branch param

cloning repo meta-ti

Fetching origin

Switched to branch 'dora'

Already up-to-date.

Note: checking out 'd1578c08bdf114bc0f1606c65bd39f0c8293c562'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at d1578c0... u-boot-ti-staging:_2013.10: Update to pull in critical fixes

cloning repo meta-linaro

Fetching origin

Switched to branch 'dora'

Already up-to-date.

Note: checking out '2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at 2d06310... linux-linaro-aarch64: use ;nobranch=1

cloning repo oe-core

Fetching origin

Previous HEAD position was 5c51dd2... qt4: Fix Qt 4.8.5 source to new location

Switched to branch 'dora'

Already up-to-date.

Note: checking out '5c51dd2e9bab54013652475888554bc4660dcff3'.

You are in 'detached HEAD' state. You can look around, make experimental

changes and commit them, and you can discard any commits you make in this

state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may

do so (now or later) by using -b with the checkout command again. Example:

 git checkout -b new_branch_name

HEAD is now at 5c51dd2... qt4: Fix Qt 4.8.5 source to new location

################################################################################

The bblayers.conf configuration file has been created for you with some

default values.  Please verify the contents of your conf/bblayers.conf

file for correctness.

NOTE: Any additional entries to this file will be lost if the ./oe-layertool-setup.sh

     script is run again.  To add entries permanently to this file

     please add them to the config file used and rerun the

     ./oe-layertool-setup.sh script.

################################################################################

The local.conf configuration file has been created for you with some

default values.  Please verify the contents of your conf/local.conf

file for correctness.

By default the number of threads used by the build is set to the number

of CPUs found on your system.

NOTE: You will probably want to change the default MACHINE setting in the

     local.conf file to the machine you are trying to build.

WARNING: Found existing /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/conf/local.conf

Saving a backup to /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/conf/local.conf.bak

################################################################################

A setenv file has been created for you in the conf directory.  Please verify

The contents of this file.  Once you have verified the contents please source

this file to configure your environment for building:

   . conf/setenv

You can then start building using the bitbake command.  You will likely want

to set the MACHINE option if you have not done so in your local.conf file.

For example:

   MACHINE=xxxxx bitbake <target>

Common targets are:

   core-image-minimal

   core-image-sato

   meta-toolchain

   meta-toolchain-sdk

   adt-installer

   meta-ide-support

[GLSDK]> cd build

[GLSDK]> . conf/setenv

[GLSDK]> cp conf/local.conf conf/local.conf.pristine

[GLSDK]> echo ARAGO_BRAND = "glsdk" >> conf/local.conf

[GLSDK]> MACHINE=dra7xx-evm bitbake arago-glsdk-multimedia-image

ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed

Traceback (most recent call last):

 File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x4c20d50>)

 File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x1eb7fd0>)

IndexError: list index out of range

Loading cache: 100% |############################################################################################################| ETA:  00:00:00

Loaded 2124 entries from dependency cache.

Parsing recipes: 100% |##########################################################################################################| Time: 00:00:01

Parsing of 1714 .bb files complete (1703 cached, 11 parsed). 2124 targets, 106 skipped, 0 masked, 0 errors.

WARNING: No recipes available for:

 /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-arago/meta-arago-distro/recipes-kernel/linux/linux-ti-staging_3.8.bbappend

NOTE: Resolving any missing task queue dependencies

Build Configuration:

BB_VERSION        = "1.20.0"

BUILD_SYS         = "x86_64-linux"

NATIVELSBSTRING   = "Ubuntu-12.04"

TARGET_SYS        = "arm-oe-linux-gnueabi"

MACHINE           = "dra7xx-evm"

DISTRO            = "arago"

DISTRO_VERSION    = "2013.10"

TUNE_FEATURES     = "armv7a vfp thumb neon callconvention-hard cortexa15"

TARGET_FPU        = "vfp-neon"

meta-glsdk        = "(nobranch):e1b48fc60cd16ba7a12c1d0394901c0152c26f76"

meta-arago-distro

meta-arago-extras = "(nobranch):fb6e3d530f71a533bea720eca091002fd772e8e1"

meta-qt5          = "(nobranch):5b5616b63bdf163ea3eb2ca8857c56a393435fe3"

toolchain-layer  

meta-networking  

meta-ruby        

meta-oe           = "(nobranch):ee173678383683e972c7d4d6f0ef5790bfa50274"

meta-ti           = "(nobranch):d1578c08bdf114bc0f1606c65bd39f0c8293c562"

meta-linaro-toolchain = "(nobranch):2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2"

meta              = "(nobranch):5c51dd2e9bab54013652475888554bc4660dcff3"

NOTE: Preparing runqueue

NOTE: Executing SetScene Tasks

NOTE: Executing RunQueue Tasks

ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed

Traceback (most recent call last):

 File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x600a7d0>)

 File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x2c8d190>)

IndexError: list index out of range

ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed

Traceback (most recent call last):

 File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x56cb810>)

 File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x23601d0>)

IndexError: list index out of range

ERROR: Function failed: do_install (log file is located at /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.7271)

ERROR: Logfile of failure stored in: /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.7271

Log data follows:

| DEBUG: Executing shell function do_install

| cp: cannot stat `/usr/arm-linux-gnueabihf/libc/lib/*': No such file or directory

| WARNING: exit code 1 from a shell command.

| ERROR: Function failed: do_install (log file is located at /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.7271)

ERROR: Task 46 (/home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-linaro/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb, do_install) failed with exit code '1'

WARNING: Checksum failure encountered with download of - will attempt other sources if available

WARNING: Renaming /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/downloads/expat-2.1.0.tar.gz to /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/downloads/expat-2.1.0.tar.gz_bad-checksum_d3c19b88223a8b762226f5c5ae3b1613

NOTE: Tasks Summary: Attempted 223 tasks of which 218 didn't need to be rerun and 1 failed.

Waiting for 0 running tasks to finish:

Summary: 1 task failed:

 /home/vaibhav/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-linaro/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb, do_install

Summary: There were 3 WARNING messages shown.

Summary: There were 4 ERROR messages shown, returning a non-zero exit code.

[GLSDK]>

[GLSDK]> Completed Yocto build at Wed Dec 10 16:03:38 IST 2014

[GLSDK]>

vaibhav@CPU-194:~/home/miracast_new/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$

Hey I put one more fresh build. It's failing only..
Please find following log.





vaibhav@CPU-194:~/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$
vaibhav@CPU-194:~/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$ ./build-core-sdk.sh dra7xx-evm
In which directory do you want to place the downloads for the Yocto build ?(if this directory does not exist it will be created)
Ensure that complete path is provided.
[ /home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/downloads ]
[GLSDK]>
[GLSDK]> Current Directory is /home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers
[GLSDK]> PATH is /usr/local/cuda-6.5/bin:/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/cuda-6.5/bin:/usr/local/cuda-6.5/bin:/home/vaibhav/home/miracast_final/gcc-linaro-arm-linux-gnueabihf-4.7-2013.03-20130313_linux/bin
[GLSDK]> Building on CPU-194 running Linux CPU-194 3.5.0-54-generic #81~precise1-Ubuntu SMP Tue Jul 15 04:02:22 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux
[GLSDK]> Starting Yocto build at Fri Dec 12 14:46:57 IST 2014
[GLSDK]>
[GLSDK]> ./oe-layertool-setup.sh -f configs/glsdk/glsdk-6.10.00.02-config.txt
/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers


cloning repo bitbake

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/bitbake'...
remote: Counting objects: 32549, done.
remote: Compressing objects: 100% (12830/12830), done.
remote: Total 32549 (delta 23201), reused 26426 (delta 18305)
Receiving objects: 100% (32549/32549), 6.86 MiB | 149 KiB/s, done.
Resolving deltas: 100% (23201/23201), done.
Branch 1.20 set up to track remote branch 1.20 from origin.
Switched to a new branch '1.20'
Already up-to-date.
Note: checking out '3bb3f1823bdd46ab34577d43f1e39046a32bca77'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 3bb3f18... fetch2/__init__.py: let try_mirror_url return correct value


cloning repo meta-glsdk

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-glsdk'...
remote: Counting objects: 369, done.
remote: Compressing objects: 100% (245/245), done.
remote: Total 369 (delta 122), reused 305 (delta 91)
Receiving objects: 100% (369/369), 93.41 KiB | 39 KiB/s, done.
Resolving deltas: 100% (122/122), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out 'e1b48fc60cd16ba7a12c1d0394901c0152c26f76'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at e1b48fc... dspdce: Updated binary location


cloning repo meta-arago

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-arago'...
remote: Counting objects: 9956, done.
remote: Compressing objects: 100% (8866/8866), done.
remote: Total 9956 (delta 6193), reused 1587 (delta 750)
Receiving objects: 100% (9956/9956), 9.06 MiB | 739 KiB/s, done.
Resolving deltas: 100% (6193/6193), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out 'fb6e3d530f71a533bea720eca091002fd772e8e1'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at fb6e3d5... wl18xx: scripts: update scripts to match OOB configuration


cloning repo meta-qt5

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-qt5'...
remote: Counting objects: 4269, done.
remote: Compressing objects: 100% (1766/1766), done.
remote: Total 4269 (delta 2319), reused 4073 (delta 2210)
Receiving objects: 100% (4269/4269), 1.16 MiB | 432 KiB/s, done.
Resolving deltas: 100% (2319/2319), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out '5b5616b63bdf163ea3eb2ca8857c56a393435fe3'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 5b5616b... licenses: rename NOKIA-TPLA-2.4 to DIGIA-TPLA-2.4


cloning repo meta-openembedded

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-openembedded'...
remote: Counting objects: 43803, done.
remote: Compressing objects: 100% (17577/17577), done.
remote: Total 43803 (delta 26178), reused 40789 (delta 24182)
Receiving objects: 100% (43803/43803), 20.53 MiB | 57 KiB/s, done.
Resolving deltas: 100% (26178/26178), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out 'ee173678383683e972c7d4d6f0ef5790bfa50274'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at ee17367... cloud9: Fix branch param


cloning repo meta-ti

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-ti'...
remote: Counting objects: 13900, done.
remote: Compressing objects: 100% (8890/8890), done.
remote: Total 13900 (delta 7935), reused 8600 (delta 4346)
Receiving objects: 100% (13900/13900), 6.95 MiB | 352 KiB/s, done.
Resolving deltas: 100% (7935/7935), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out 'd1578c08bdf114bc0f1606c65bd39f0c8293c562'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at d1578c0... u-boot-ti-staging:_2013.10: Update to pull in critical fixes


cloning repo meta-linaro

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-linaro'...
remote: Counting objects: 6656, done.
remote: Compressing objects: 100% (3144/3144), done.
remote: Total 6656 (delta 3287), reused 6432 (delta 3113)
Receiving objects: 100% (6656/6656), 2.14 MiB | 520 KiB/s, done.
Resolving deltas: 100% (3287/3287), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out '2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 2d06310... linux-linaro-aarch64: use ;nobranch=1


cloning repo oe-core

Cloning into '/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/oe-core'...
remote: Counting objects: 202349, done.
remote: Compressing objects: 100% (56620/56620), done.
remote: Total 202349 (delta 143988), reused 198971 (delta 141380)
Receiving objects: 100% (202349/202349), 82.61 MiB | 112 KiB/s, done.
Resolving deltas: 100% (143988/143988), done.
Branch dora set up to track remote branch dora from origin.
Switched to a new branch 'dora'
Already up-to-date.
Note: checking out '5c51dd2e9bab54013652475888554bc4660dcff3'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

git checkout -b new_branch_name

HEAD is now at 5c51dd2... qt4: Fix Qt 4.8.5 source to new location


################################################################################
The bblayers.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/bblayers.conf
file for correctness.

NOTE: Any additional entries to this file will be lost if the ./oe-layertool-setup.sh
script is run again. To add entries permanently to this file
please add them to the config file used and rerun the
./oe-layertool-setup.sh script.



################################################################################
The local.conf configuration file has been created for you with some
default values. Please verify the contents of your conf/local.conf
file for correctness.

By default the number of threads used by the build is set to the number
of CPUs found on your system.

NOTE: You will probably want to change the default MACHINE setting in the
local.conf file to the machine you are trying to build.



################################################################################
A setenv file has been created for you in the conf directory. Please verify
The contents of this file. Once you have verified the contents please source
this file to configure your environment for building:

. conf/setenv

You can then start building using the bitbake command. You will likely want
to set the MACHINE option if you have not done so in your local.conf file.

For example:
MACHINE=xxxxx bitbake <target>

Common targets are:
core-image-minimal
core-image-sato
meta-toolchain
meta-toolchain-sdk
adt-installer
meta-ide-support
[GLSDK]> cd build
[GLSDK]> . conf/setenv
[GLSDK]> cp conf/local.conf conf/local.conf.pristine
[GLSDK]> echo ARAGO_BRAND = "glsdk" >> conf/local.conf
[GLSDK]> MACHINE=dra7xx-evm bitbake arago-glsdk-multimedia-image
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x2d3df90>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x2cdd890>)
IndexError: list index out of range

Parsing recipes: 100% |##########################################################################################################| Time: 00:01:48
Parsing of 1714 .bb files complete (0 cached, 1714 parsed). 2124 targets, 106 skipped, 0 masked, 0 errors.
WARNING: No recipes available for:
/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-arago/meta-arago-distro/recipes-kernel/linux/linux-ti-staging_3.8.bbappend
NOTE: Resolving any missing task queue dependencies

Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-12.04"
TARGET_SYS = "arm-oe-linux-gnueabi"
MACHINE = "dra7xx-evm"
DISTRO = "arago"
DISTRO_VERSION = "2013.10"
TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard cortexa15"
TARGET_FPU = "vfp-neon"
meta-glsdk = "(nobranch):e1b48fc60cd16ba7a12c1d0394901c0152c26f76"
meta-arago-distro
meta-arago-extras = "(nobranch):fb6e3d530f71a533bea720eca091002fd772e8e1"
meta-qt5 = "(nobranch):5b5616b63bdf163ea3eb2ca8857c56a393435fe3"
toolchain-layer
meta-networking
meta-ruby
meta-oe = "(nobranch):ee173678383683e972c7d4d6f0ef5790bfa50274"
meta-ti = "(nobranch):d1578c08bdf114bc0f1606c65bd39f0c8293c562"
meta-linaro-toolchain = "(nobranch):2d06310e96959f3bf90f25a3fdd0f8dd0ed7a0b2"
meta = "(nobranch):5c51dd2e9bab54013652475888554bc4660dcff3"

NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x67047d0>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x331b190>)
IndexError: list index out of range

WARNING: Failed to fetch URL http://zlib.net/pigz/pigz-2.3.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-1.4.8.tar.bz2, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.org/dist/apr/apr-util-1.5.2.tar.gz, attempting MIRRORS if available
WARNING: Failed to fetch URL http://www.apache.org/dist/subversion/subversion-1.7.10.tar.bz2, attempting MIRRORS if available
ERROR: Execution of event handler 'external_linaro_toolchain_version_handler' failed
Traceback (most recent call last):
File "external_linaro_toolchain_version_handler(e)", line 8, in external_linaro_toolchain_version_handler(e=<bb.event.ConfigParsed object at 0x5225810>)
File "external-linaro-toolchain-versions.inc", line 4, in elt_get_main_version(d=<bb.data_smart.DataSmart object at 0x1fac1d0>)
IndexError: list index out of range

ERROR: Function failed: do_install (log file is located at /home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.30728)
ERROR: Logfile of failure stored in: /home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.30728
Log data follows:
| DEBUG: Executing shell function do_install
| cp: cannot stat `/usr/arm-linux-gnueabihf/libc/lib/*': No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_install (log file is located at /home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/build/arago-tmp-external-linaro-toolchain/work/cortexa15hf-vfp-neon-3.10-oe-linux-gnueabi/external-linaro-toolchain/-r2-arago6/temp/log.do_install.30728)
ERROR: Task 46 (/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-linaro/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb, do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 422 tasks of which 0 didn't need to be rerun and 1 failed.
Waiting for 0 running tasks to finish:

Summary: 1 task failed:
/home/vaibhav/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers/sources/meta-linaro/meta-linaro-toolchain/recipes-devtools/external-linaro-toolchain/external-linaro-toolchain.bb, do_install
Summary: There were 5 WARNING messages shown.
Summary: There were 4 ERROR messages shown, returning a non-zero exit code.
[GLSDK]>
[GLSDK]> Completed Yocto build at Fri Dec 12 15:30:05 IST 2014
[GLSDK]>
vaibhav@CPU-194:~/home/miracast_final/ti-glsdk_dra7xx-evm_6_10_00_02/yocto-layers$

Please update on this.