• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 404 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DM388 camera input with YUV422-16bit

user1403821
Prodigy 120 points
Other Parts Discussed in Thread: DM388

We have a new camera sensor.

It's output is YUV422_16bit_ 720P@60(CCIR601 16bit-mode).

Our EVM is IPNCDM388(Main-Chipset "DM388").And the software is base on RDK3.8.0.0.

My question is.....

Base on our camera sensor output-parameter,the ISS data-path how to set with RDK3.8.0.0??

Have any reference code,demo or example?

 

  • 0
    TI__Genius 13460 points
    As I remember there should be OV10630 can be taken as an example. But I dont remember if it is for DM38x or DM8127. They should be the same...
  • 0 in reply to Eason Wang
    Prodigy 120 points

    hi Eason

    I study OV10630.

    But it's interface is yuv422 8bit-mode.

    My sensor is yuv422 16bit-mode.Something different.......

    Cloud you tell me how to set (ISIF & IPIE_IF reg) base on my sensor ?

    My sensor parameter is

    720P60 Pix_CLK=74.25MHz,Hsync & Vsync Postive ,16bit/pix( Y(8bit),Cb/Cr(8bit))

    H_total=1688 pix

    H_active=1280 pix

    Hsync_width=40 pix

    H_sync_to_active=256 pix

    V_total=750 line

    V_active=720 line

    Vsync_width=5 line

    V_sync_to_active=25 line