Continuous Mode in ADC with 40khz

Naven

Intellectual 750 points

hi,

it is possible to adc continuous mode in sdk7 kernel 3.12 with 40khz ,

please send me procedure and guidelines.

Thanks in Advance,

Naven

over 10 years ago

0 Biser Gatchev-XID over 10 years ago

TI__Guru**** 393215 points

Hi Naven,

Please check this wiki: http://processors.wiki.ti.com/index.php/Linux_Core_ADC_User's_Guide

0 Naven over 10 years ago in reply to Biser Gatchev-XID

Intellectual 750 points

Hello sir,

This user guide for sdk6 and in menu config only visible kfifo in sdk7
so it is working for one shot mode ,i need continuous mode.

Regards,
Naven

0 Biser Gatchev-XID over 10 years ago in reply to Naven

TI__Guru**** 393215 points

The wiki is for SDK 7.0.

0 Naven over 10 years ago in reply to Biser Gatchev-XID

Intellectual 750 points

hello sir,

when iam check my path /sys/bus/iio/devices/iio\:device0 missing scan_elements and mode .
so how can i enable continuous mode and its possible 40khz sampling rate .

Iam new with ADC .

Regards,
Naveen.

Processors

Processors forum

Continuous Mode in ADC with 40khz