Routing MCBSP to daughter cards

Sundas Nayab1

Hi,

I want to route MCBSP to daughtercard connectors rather than the codec. Can anyone please guide me on configuring the CPLD MISC register, I know for this I have to set MCBSP1SEL or MCBSP2SEL bits in misc register but I dont know how?

over 10 years ago

0 Ki over 10 years ago

TI__Guru**** 463291 points

hello,
This question is best served in the device forum. I can move it, but I first need to know which exact device you are using. Thanks
ki

0 Sundas Nayab1 over 10 years ago in reply to Ki

Intellectual 300 points

I am using C6416

0 Ki over 10 years ago in reply to Sundas Nayab1

TI__Guru**** 463291 points

Thanks. I will move this thread to the C6000 forums

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Thanks Lee.

Hi Sundas,
I request you to avoid the duplicate post.

http://e2e.ti.com/support/dsp/tms320c6000_high_performance_dsps/f/112/t/396240

If you still face any problems/queries, please reply to the above thread for the follow up.

Thanks for your understanding.

Processors

Processors forum

Routing MCBSP to daughter cards