This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

secondary bootload for 6747

Other Parts Discussed in Thread: OMAP-L137

  hi,

 i am using dms320c6747 and a nand flash,now my application is too big ,i wanna   use a secondary bootloader  ,but  i don't know how ,can anybody tell me how to sencondary bootload for c6747 by nand mode,thanks!

  • Hi,

    Please see document:

    http://www-s.ti.com/sc/techlit/sprab04

    This page describes how to implemment the bootloades using SPI flash:

    http://tiexpressdsp.com/index.php/Flashing_the_C6747

    But you can use most os the principles for NAND flash.

    1) Make sure that when you are generating the AIS using the AISgen.exe described in the page that you choose NAND flash instead of spi flash.

    2) For the NAND writer, after you install all the software according to the GSG, it will be at:

    C:\C674x_dsp_1_00_00_10\REL_LSP_02_20_00_07\PSP_02_20_00_07\board_utilities\flash_writers\nand_writer\ccsv3.3

    This program works for the NAND flash that is in the daughter card for the OMAP-L137/C6747. Please find the daughter card for the OMAP-L137/C6747 EVM with an LCD display at:

    http://www.spectrumdigital.com/product_info.php?&products_id=234


    The schematics are already available at http://support.spectrumdigital.com/boards/dskda830 under DSKDA830 User Interface Board.

     

  • Mariana said:

    Hi,

    Please see document:

    http://www-s.ti.com/sc/techlit/sprab04

    This page describes how to implemment the bootloades using SPI flash:

    http://tiexpressdsp.com/index.php/Flashing_the_C6747

     

    But you can use most os the principles for NAND flash.

    1) Make sure that when you are generating the AIS using the AISgen.exe described in the page that you choose NAND flash instead of spi flash.

    2) For the NAND writer, after you install all the software according to the GSG, it will be at:

    C:\C674x_dsp_1_00_00_10\REL_LSP_02_20_00_07\PSP_02_20_00_07\board_utilities\flash_writers\nand_writer\ccsv3.3

    hi,Mriana,thanks for your reply ,i have seen the staffs,and i can use nand flash correctly,my application can work well, but in this way ,my application run in the flash,the speed is slow, so i want to second load my application to rom, i have read  secondary bootloader for c6000,but i still don't know how to secondary bootload my application ,can you tell me some details about it , appreciate for your answer

    This program works for the NAND flash that is in the daughter card for the OMAP-L137/C6747. Please find the daughter card for the OMAP-L137/C6747 EVM with an LCD display at:

    http://www.spectrumdigital.com/product_info.php?&products_id=234


    The schematics are already available at http://support.spectrumdigital.com/boards/dskda830 under DSKDA830 User Interface Board.

     

     

  • Mariana said:

    Hi,

    Please see document:

    http://www-s.ti.com/sc/techlit/sprab04

    This page describes how to implemment the bootloades using SPI flash:

    http://tiexpressdsp.com/index.php/Flashing_the_C6747

     

    But you can use most os the principles for NAND flash.

    1) Make sure that when you are generating the AIS using the AISgen.exe described in the page that you choose NAND flash instead of spi flash.

    2) For the NAND writer, after you install all the software according to the GSG, it will be at:

    C:\C674x_dsp_1_00_00_10\REL_LSP_02_20_00_07\PSP_02_20_00_07\board_utilities\flash_writers\nand_writer\ccsv3.3

    hi,Mriana,thanks for your reply ,i have seen the staffs,and i can use nand flash correctly,my application can work well, but in this way ,my application run in the flash,the speed is slow, so i want to second load my application to rom, i have read  secondary bootloader for c6000,but i still don't know how to secondary bootload my application ,can you tell me some details about it , appreciate for your answer

    This program works for the NAND flash that is in the daughter card for the OMAP-L137/C6747. Please find the daughter card for the OMAP-L137/C6747 EVM with an LCD display at:

    http://www.spectrumdigital.com/product_info.php?&products_id=234


    The schematics are already available at http://support.spectrumdigital.com/boards/dskda830 under DSKDA830 User Interface Board.

     

     

  • Mariana said:

    Hi,

    Please see document:

    http://www-s.ti.com/sc/techlit/sprab04

    This page describes how to implemment the bootloades using SPI flash:

    http://tiexpressdsp.com/index.php/Flashing_the_C6747

    But you can use most os the principles for NAND flash.

    1) Make sure that when you are generating the AIS using the AISgen.exe described in the page that you choose NAND flash instead of spi flash.

    2) For the NAND writer, after you install all the software according to the GSG, it will be at:

    C:\C674x_dsp_1_00_00_10\REL_LSP_02_20_00_07\PSP_02_20_00_07\board_utilities\flash_writers\nand_writer\ccsv3.3

    This program works for the NAND flash that is in the daughter card for the OMAP-L137/C6747. Please find the daughter card for the OMAP-L137/C6747 EVM with an LCD display at:

    http://www.spectrumdigital.com/product_info.php?&products_id=234


    The schematics are already available at http://support.spectrumdigital.com/boards/dskda830 under DSKDA830 User Interface Board.

     

     

    hi,Mriana,thanks for your reply ,i have seen the staffs,and i can use nand flash correctly,my application can work well, but in this way ,my application run in the flash,the speed is slow, so i want to second load my application to rom, i have read  secondary bootloader for c6000,but i still don't know how to secondary bootload my application ,can you tell me some details about it , appreciate for your answer