How to connect Vayu EVM board

user4268977

Prodigy 80 points

Hi,

We just purchased below TI J6 dev. Kit:

• Vayu EVM CPU Board

• JAMR3 Application Board

• 10.1 inch LCD/TS Daughter Board

Now the gating is we need a user guide document to setup the dev. kit, or have any picture to show how to connect these three components?

Regards,

Hubery.

over 10 years ago

0 Yanko Todorov-XID over 10 years ago

TI__Mastermind 29520 points

Hello Hubery,

Do you have a schematic for VAYU CPU board?

10.1 inch display must be connect to connector J15 LCD Interface on the top side of VAYU EVM board.

JAMR3 board must be connected to EXP_P2 EXPANSION connector.

The user guide for VAYU EVM board must provide to you by your local FAE.

Best regards,
Yanko

0 user4268977 over 10 years ago in reply to Yanko Todorov-XID

Prodigy 80 points

Hi Yanko,
I don't have schematic for VAYU CPU board. If you have more detail information for how to connect, that' helpful to us. Thanks.

Regards,
Hubery.

0 Yanko Todorov-XID over 10 years ago in reply to user4268977

TI__Mastermind 29520 points

Hello Hubery,

Do you have NDA agreement with TI?

I suggest to refer to following links:
processors.wiki.ti.com/.../Category:DRA7xx
omapedia.org/.../6AK.1.2_Release_Notes

For more information for DRA7xx device you must contact your local FAE. There is no public information for DRA7xx family devices.

Best regards,
Yanko

Processors

Processors forum

How to connect Vayu EVM board