MCSBP registers platform C6657

giorgos tsoumplekas

Expert 1840 points

Hello,

I cannot see in the McSBP in the register window of the CCs.

I am using the composer studio 6 and usb emulator XDS200 for the platform C6657 (TMSC3206657 Evaluation Module) .

Is any extra configuration that is needed?

Best regards

George

over 10 years ago

0 Ganapathi Dhandapani95 over 10 years ago

TI__Mastermind 28085 points

Hi,

Better to use memory browser window to view the register values. Open the Memory view (in CCSv5, view->Memory Browser), and view the memory address(Eg: MCBSP register base address 0x021B4000). For more information refer below wiki link

processors.wiki.ti.com/.../GSG:Debugging_projects_v5

Thanks,

0 giorgos tsoumplekas over 10 years ago in reply to Ganapathi Dhandapani95

Expert 1840 points

Hello,
Thank you for the prompt reply.
There is no other way to see the MCSBP registers in the register window
George

0 Ganapathi Dhandapani95 over 10 years ago in reply to giorgos tsoumplekas

TI__Mastermind 28085 points

I have connected C6657 EVM and try to view the MCBSP register values on register window of the CCS, but it not showing. You can use memory browser window to view the register values, it should be show the same register values. Other wise you can add some debug code on your test application and print the MCBSP register values in console window.

Thanks,

Processors

Processors forum

MCSBP registers platform C6657