Get the troubles to use CAN bus in AM335x

Henry Chou

Intellectual 265 points

Dear all:

Anyone with the AM335x experience are skill in CAN driver, Please take reference with

over 10 years ago

0 Biser Gatchev-XID over 10 years ago

TI__Guru**** 393215 points

Hi Henry,

This forum supports only the TI distributed Linux SDK.

0 Biser Gatchev-XID over 10 years ago in reply to Biser Gatchev-XID

TI__Guru**** 393215 points

Reading your other thread it seems to me that your problems arise from trying to use the ICE and IDK boards with software that doesn't support them. These two boards are designed to work with the Industrial SDK: http://downloads.ti.com/sitara_indus/esd/AM335x_SYSBIOS_Industrial_SDK/latest/index_FDS.html

0 Henry Chou over 10 years ago in reply to Biser Gatchev-XID

Intellectual 265 points

Hi! Biser:
Nice to get your reply. I got the IASDK version 1.1.0.4 before. And I had already used it for EtherCAT appliance. However, the CAN example code that I can find is startware only. So that I tried to modify the startware can driver to RTOS. But it's very tough to do that! I got anther information from China TI's community , it(CAN driver) can be implement by the EZSDK 6.0 in linux. Even though , I choice the RTOS platform for develop. But I think that it's a good news to find the solution. Now I am studying EZSDK.
Henry

Processors

Processors forum

Get the troubles to use CAN bus in AM335x