SVC encoder support on DM8127 IPNC RDK 3.8

Vijay Patel

Hi,

In the Product_Datasheet_IPNC_DM8127.pdf, it is written that "Supports SVC-T mode of encoding for H264 Codecs". How to enable SVC encoder in IPNC RDK 3.8?

Thanks,

Vijay Patel

over 10 years ago

0 Margarita Gashova over 10 years ago

TI__Guru* 80190 points

Hello,

You could check the H264 user guide about: IH264ENC_SVCCodingParams . Also you could use our Multimedia forum : http://e2e.ti.com/support/embedded/multimedia_software_codecs/

BR
Margarita

0 Vijay Patel over 10 years ago in reply to Margarita Gashova

Prodigy 190 points

Hi Margarita,

Thanks for your reply. I am currently using IPNC RDK 3.8 on DM8127. I tested out H.264 Main profile, base profile and high profile.
Now we are testing SVC encoder. I have following query:-
1. I understand that SVC is already supported on IPNC RDK 3.8. We just need to configure it as described in IPNC_RDK_Codec_Intergration_Guide.pdf under For SVC-T section. Please confirm this.

Thanks,
Vijay Patel

0 Margarita Gashova over 10 years ago in reply to Vijay Patel

TI__Guru* 80190 points

Hello,

I will notify the IPNC team for help.

BR
Margarita

0 Vijay Patel over 10 years ago in reply to Margarita Gashova

Prodigy 190 points

Hi Margarita,

Any update on this? I have not received any response on this from IPNC team?

Thanks,

Vijay Patel

0 Margarita Gashova over 10 years ago in reply to Vijay Patel

TI__Guru* 80190 points

Hello,

You could try to post in our Multimedia forum : e2e.ti.com/.../multimedia_software_codecs

or to contact your local FAE. I will notify the IPNC team as well.

BR
Margarita

Processors

Processors forum

SVC encoder support on DM8127 IPNC RDK 3.8