communication between PC and EVM via ethernet cable

hello Sir ;

please tell us what kind of data do you want to send to EVM ?
and which MCSDK do you use ?

regards ;

The mcsdk I use is mcsdk_2_01_02_06.
The data I want to send is just some hexadecimal numbers.

Thank you,maybe i have to find another way.

you can also use a simple boot-loader (like u-boot) . then configure the tftp server in your host computer . which is also an easy way... if you decide to follow this method . i will give you more details.

if this post answers your question, please click the Verify Answer button .

regards.

Hi Capitaine,
He was using the C6670 DSP processor so we can't use u-boot and TFTP server as we do K2H and K2E board for his requirement.

Hi Capitaine,
I appreciate you for helping other community members.
Thank you.

thank you very much Sir . i understand . but i think it is possible to run even a Linux kernel in the C6000 DSPs also . and not only the ARM cores . if what i say is not correct , please give me the right information . i need really to be sure of that .

thank you .

Hi Capitaine,
Thank you for your suggestion,I will have a try with that~