This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Read / write to NAND Flash in U-Boot on Beagle Bone Black board

Dear All,

I am using beagle bone black with OS "Linux version 3.12.10-ti2013.12.01". I am trying to access the NAND flash memory using the "nand" commands in U-Boot. However I am not able to execute these commands. Can you please let me know is there any settings that I need to do to enable nand operations in U-Boot on Beagle Bone Black board.

Thanks,

Sridhar CR