How to use UART0 controller in PRU

Jason Zhang

Hi team, One of our customers wants to use the UART0 controller in PRU. Is there any example or document to show the customer how to configure the PRU as a UART? Thanks!

over 11 years ago

0 Yordan Kovachev over 11 years ago

TI__Guru**** 161600 points

Hi Jason,

Have you checked the examples in PRU firmware (www.ti.com/.../pru-swpkg)? You can use the following wiki for reference on how to run the demos: processors.wiki.ti.com/.../PRU_Cape_Getting_Started_Guide

Best Regards,
Yordan

Processors

Processors forum

How to use UART0 controller in PRU