• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 97 subscribers
  • Views 451 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS320C6713 DSP Starter kit

Stephen Taranovich
Intellectual 1330 points
Other Parts Discussed in Thread: TLV320AIC23B

I have a TMS320C6713 DSP Starter kit. Here is my question: I sent out a signal through onboard ADC to DSP and DSP to DAC. The same signal I sent in that I received a signal with less amplitude and some phase shift (measurement from my dynamic signal analyzer). The codec on this board is TLV320AIC23B. Based on this document, I should able to change internal filter to change the base system response. I would like to minimize the system response. I attached document as reference. Page 3-9 section 3.3.2.1

tlv320aic23b Data Manual.pdf