This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Porting WIFI & BT to AM3352

Other Parts Discussed in Thread: WL1831, AM3352

Dear TI E2E Community,

As I have some knowledge on WIFI & BT, As this is the first time am working on porting WIFI & BT  driver module ie., ( WL1831/1801) which is interfaced via MMC0 for WIFI & (USB1-UART3) for BT, in AM3352 processor in my custom board

1. Am using ti sdk 8 BSP's, Could you please let me know how to get started with porting of this WIFI & BT & how this modules (WIFI & BT ) can be verified & tested , ie., any linux utilities?? any configurations needs to be done in rootfs????

2. Due to insufficient UART ports in my custom board, am using UART3 / USB1 ports., I have changed from USB to UART mode in usb_ctrl1 register, I have doubt, could you please let me know whether this way of configuring BT over (ie., UART3 / USB1) works????????????

Could you please help me out  with this queries  

Kindly do the needful as early as possible

Awaiting for your replies

Many Thanks in advance