Sitara 3359 ADC Example Code

Jaikey

Prodigy 230 points

Other Parts Discussed in Thread: SYSBIOS

The adcVoltMeasure.c example does not work.

Do you have any other example??

I need as soon as possible help in this case.

Best regards,

Juergen Trescher

over 10 years ago

0 Yordan Kovachev over 10 years ago

TI__Guru**** 161600 points

Hi Juergen,

Have you checked the following wikis:
processors.wiki.ti.com/.../Processor_SDK_Linux_ADC
processors.wiki.ti.com/.../Linux_Core_ADC_User%27s_Guide

Best Regards,
Yordan

0 Jaikey over 10 years ago in reply to Yordan Kovachev

Prodigy 230 points

Hello Yordan,

yes I have checked the Wikis, but this does not help, because I use SYSBIOS as RTOS.
Is there no other example code I can use?

Best regards,
Jürgen

0 Yordan Kovachev over 10 years ago in reply to Jaikey

TI__Guru**** 161600 points

Hi Juergen,

This forum supports only Linux & AM335x HW related problems.
For RTOS support, please refer to the RTOS forum: e2e.ti.com/.../355

A non OS example, that may be of use to you (as a general ADC setup & usage) is the STARTERWARE ADC code: processors.wiki.ti.com/.../StarterWare_02.00.00.07_User_Guide
Again StarterWare is supported on a specially dedicated forum: e2e.ti.com/.../790

Hope this helps.

Best Regards,
Yordan

Processors

Processors forum

Sitara 3359 ADC Example Code