• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 99 subscribers
  • Views 574 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

using two SoC TCI6638k2k, boot SoC1 from SoC0, How?

srt35
Intellectual 640 points
Other Parts Discussed in Thread: TCI6638K2K

Hi community,

Im working on a custom design board. It has two tci6638k2k SoC, 1 SoC has 4arm+8dsp, so i have 2x(4arm+8dsp).

I want to boot SoC1 from SoC0, using with Ethernet, Srio or Hyperlink. Im searching but didnt find any document related. Please give me a head start, any suggestion would be help,

Thanks.

Srt. 

  • 0
    TI__Guru* 81335 points

    Hi Srt.,

    What is the  boot mode selected for SoC0? What operating system & application will you be running on SoC0 & 1?  I hope you have refereed boot loader user guides of DSP & ARM. If not please refer them from below links.

    Thank you.

  • 0
    TI__Genius 12320 points
    Hi Srt,

    The tag says uboot, so you're doing ARM boots, correct? Will you be running Linux?

    Ethernet is pretty straight forward. If you set up SoC0 with a DHCP/BOOTP server and do an ethernet boot on SoC1, then it will just boot and fetch the boot file from SoC0.

    Regards,
    Mike