• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 3030 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Sample programs for TMS320C6748 DSP development kit

Yerbolat Khassanov
Prodigy 90 points
Other Parts Discussed in Thread: TMS320C6748

Hi,

Is there any tutorial/guide/book/lecture teaching/explaining how to write simple programs for TMS320C6748 DSP development kit (http://www.ti.com/lit/ml/sprt633/sprt633.pdf).

Specifically, I am interested on simple code which takes data from Line-in, applies some filter(high/low/band pass) and outputs it to Line-out.

I will be very grateful if you can share code.

Regards,

YK

PS. I am newbie

  • 0
    Mastermind 6115 points
    Hi Yerbolat,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

    You can do hands-on using starterware software package for C6748. It is very easy to understand as it a bare-metal code(Non-OS).

    You can download it from below mentioned link.
    processors.wiki.ti.com/.../StarterWare

    After installing it you will find an audio example project here,
    ~\C6748_StarterWare_1_20_04_01\build\c674x\cgt_ccs\c6748\lcdkC6748\mcasp
    (This Example project takes input from LINE_IN of the EVM and loops back to the LINE_OUT of the EVM.)

    From the above link itself you can download Quick Start Guide, Getting Started Guide and User Guide which will be very useful in going ahead.
  • 0 in reply to Arvind Singh
    Prodigy 90 points

    Thank you,

    It was very helpful to boost my intro to DSP world.

    Regards,

    YK