Can I use Timer Interrupt and external interrupt without RTOS or Bios

Chungwoo Lee

Other Parts Discussed in Thread: TMS320C6671

Hi All,

I want work TMS320C6671 timer interrupt and external interrupt without RTOS or BIOS.

I think, first make vector table, second setup Timer and final setup CIC, but I don't know these steps is right and how I can.

If you have some examples or solutions, let me know.

over 10 years ago

0 Raja over 10 years ago

TI__Guru* 81335 points

Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com). Please read all the links below my signature.

We will get back to you on the above query shortly. Thank you for your patience.

0 Raja over 10 years ago in reply to Raja

TI__Guru* 81335 points

Yes, It is possible.

Please refer below e2e thread,

Thank you.

0 Raja over 10 years ago in reply to Raja

TI__Guru* 81335 points

Please refer below thread as well,

0 Chungwoo Lee over 10 years ago in reply to Raja

Prodigy 20 points

Hi Raja,

Thanks for your answer.

I already read "about C6678 timer interrupts".

I think, that used SYS/BIOS. But I don't want to use SYS/BIOS.
When I used C6713, I used timer interrupt with register setting and asm vector table.
I want know that low level work about CSL_... functions.

Thanks and Regards,
Chung Woo Lee

0 Raja over 10 years ago in reply to Chungwoo Lee

TI__Guru* 81335 points

Hi,

Please refer the CSL example(non SYS/BIOS) referred in below link,

e2e.ti.com/.../1547309

Thank you.

Processors

Processors forum

Can I use Timer Interrupt and external interrupt without RTOS or Bios