DVR RDK 8168 DSP, Video and VPSS

Balaji Govindarajan

Expert 2315 points

Hi Pavel,

In my board, the following output files can be tested without changing source code.

dvr_rdk_c6xdsp_debug_1024M_256M.xe674

dvr_rdk_m3video_release_1024M_256M.xem3

dvr_rdk_m3vpss_release_1024M_256M.xem3

Is it correct or not?

if not correct, where to be executed to get above files.

Regards

Balaji

over 10 years ago

0 Pavel Botev over 10 years ago

TI__Guru**** 170625 points

Hi Balaji,

For DVR RDK specific questions, please refer to the below links:

e2e.ti.com/.../224844
e2e.ti.com/.../426680

BR
Pavel

0 Balaji Govindarajan over 10 years ago in reply to Pavel Botev

Expert 2315 points

Dear Pavel,

I have bought CCSv6 from TI and also Blackhawk USB 560v2 system trace emulator. It is showing in CCS as disconnected when we connected between CCS and DVR RDK8168 by USB emulator. Is there any way to fix this problem?

Regards
Balaji

Regards
Balaji

0 Pavel Botev over 10 years ago in reply to Balaji Govindarajan

TI__Guru**** 170625 points

Balaji,

Balaji Govindarajan said:
I have bought CCSv6 from TI and also Blackhawk USB 560v2 system trace emulator. It is showing in CCS as disconnected when we connected between CCS and DVR RDK8168 by USB emulator. Is there any way to fix this problem?

Could you please let us know how this is related to the original question of this e2e subject?

BR
Pavel

0 Pavel Botev over 10 years ago in reply to Pavel Botev

TI__Guru**** 170625 points

This has been double posted and answered in the below e2e thread:
e2e.ti.com/.../432078

0 Balaji Govindarajan over 10 years ago in reply to Pavel Botev

Expert 2315 points

Dear Sir,
Dear Pavel,

Installed CCSv6 on Ubuntu. After installed, open Bh560v2Config Utility cannot find the BH USB560v2 system trace emulator. when i try to install driver of BH USB560 from root :
root@avc-sln-desktop:/usr/local/CCS6/ccsv6/ccs_base/emulation/Blackhawk/Install# ./bh_driver_install.sh

It it showing error message as
bhWARNING: Empty command line. Now exiting...

Because of this issue "It is showing in CCS as disconnected when we connected between CCS and DVR RDK8168 by USB emulator"

can you resolve this issue so that it will be useful for testing this product?

Regards
Balaji

Processors

Processors forum

DVR RDK 8168 DSP, Video and VPSS