• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 98 subscribers
  • Views 893 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Building a project using DSP/BIOS v 5.42.01.09 with CCS v6.0.1 which previously created with CCS v2.1

Ingrid Miriam Kepehai
Prodigy 90 points

Hi,

I'm presently using dsk6713 starter kit with CCS v6.0.1.

I' working on a project created with CCS v2.1. What I have done yet:

  1. I installed the new CCS v6.0.1
  2. I added all the source and Header file to my project
  3. I included the necessary Header file in include Option
  4. I added the  necessary libraries: bsl, csl and rts
  5. Now by creating the DsP/BIOS configuration file the window  below appear:

That's why it's impossible to create or open the ".tcf" file

I can't find and fix the error.

Thank you

Regards

Kenzilov

  • 0
    Mastermind 6115 points

    Hi Ingrid Miriam,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

    Copy attached cdb file at

    ~\bios_5_42_01_09\packages\ti\bios\config\cdb

    and check, it will work for you.

    2451.c6x1x.cdb.zip

  • 0 in reply to Arvind Singh
    Prodigy 90 points
    Hi Arvind,

    Thank you very much. I copied the file who recommend and it works perfect!

    But I want to learn more about the DSK6713. Please could you tell me more about the error? What was the problem?

    Thank you

    Regards,