Need source controller EDMA3 configuration for UART (6657)

Deutshein Deutshzwei

Intellectual 815 points

who do not mind to send

I am Mexican

thanks for the help

over 10 years ago

0 Deutshein Deutshzwei over 10 years ago

Intellectual 815 points

there are similar themes, but all options are configured in the same project

I am Mexican

thanks for the help

0 Deutshein Deutshzwei over 10 years ago in reply to Deutshein Deutshzwei

Intellectual 815 points

where to get the number id of UART interrupt 6657

0 Raja over 10 years ago in reply to Deutshein Deutshzwei

TI__Guru* 81335 points

Please refer the section 7.8 of data manual for Interrupt. Please refer below wiki for interrupt configuration and usage on keystone devices.

Thank you.

0 Raja over 10 years ago

TI__Guru* 81335 points

Have you installed latest MCSDK 2.x ?
If not, Please download and install MCSDK 2.x from link below my signature.

Are you looking for example source or projects?
If yes, please refer below path after MCSDK installation for EDMA.
..\ti\pdk_C6657_1_1_2_6\packages\ti\csl\src\ip\edma,
..\ti\edma3_lld_02_11_05_02\examples\edma3_driver

0 Sivaraj Kuppuraj over 10 years ago

TI__Mastermind 35645 points

Hi,

Thanks for your post.

We don't have sample source explicityly for UART-EDMA configuration but UART initialization, I2C-UART read and write configuration using CSL macros are available at the below source path for c665x device:

~\ti\Keystone_MCSDK_02_01\pdk_C6657_1_1_2_6\packages\ti\platform\evmc6657l\platform_lib\src\evmc665x_uart.c

Kindly check the above source path for generic UART configuration.

Thanks & regards,

Sivaraj K

-------------------------------------------------------------------------------------------------------

Please click the Verify Answer button on this post if it answers your question.

-------------------------------------------------------------------------------------------------------

Processors

Processors forum

Need source controller EDMA3 configuration for UART (6657)