The programmer project does not build - CCS 6.0 - C5517 EVM

SHIVA KUMAR MADISHETTY

Hello,

When I Build all CSL projects in CC 6.0 all projects built successfuly except the programmer project.

I need the programmer.out file to boot image on C5517 EVM. I have done this build before and it was fine but now it does not build programmer.

Is it because of C5517 EVM ?

Attached screen shot of the error.

Please help. Thanks

over 10 years ago

0 Vasantha K over 10 years ago

TI__Genius 12575 points

Hi,

You need to check your defines in programmer.c file, you might have used(enabled) multiple defines. If you are using C5517 EVM, then ensure only define related to C5517 EVM is enabled and other defines comment it out.

Hope this helps.

Regards

Vasanth

0 SHIVA KUMAR MADISHETTY over 10 years ago in reply to Vasantha K

Intellectual 255 points

Hi Vasanth,

I just tried that but I still have exact same errors.

0 Vasantha K over 10 years ago in reply to SHIVA KUMAR MADISHETTY

TI__Genius 12575 points

Hi,

Try to delete and re-import the programmer, with default defines build and check whether error goes away, if not share your programmer file.

Regards
Vasanth

0 SHIVA KUMAR MADISHETTY over 10 years ago in reply to Vasantha K

Intellectual 255 points

Hi,

I re-imported the programmer and used the original csl_general.h file (from the installation) to build programmer project and errors still exist.

I am not sure what programmer file you are referring to ? is it the programmer.c file ?

0 Vasantha K over 10 years ago in reply to SHIVA KUMAR MADISHETTY

TI__Genius 12575 points

Hi,
Programmer is independent of CSL.
Check your defines , do not enable multiple defines enable the relevant define and should work.

Regards
Vasanth

Processors

Processors forum

The programmer project does not build - CCS 6.0 - C5517 EVM