Would like to set my IP number and don´t by router

Nivaldo T. Schiefler Jr.

Intellectual 640 points

Hi Titus

I would like to set my IP number and don´t by router. do you have any ideia how to do?

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Hi,
We can get IP address in two modes, DHCP mode (you would get IP automatically from DHCP server) and Static mode ( you would set IP address)
You have to change the switch (SW9) to setup the IP mode.

Please refer to the following TI wiki page.
processors.wiki.ti.com/.../TMDXEVM6678L_EVM_Hardware_Setup

Let me know if any questions.

0 Nivaldo T. Schiefler Jr. over 9 years ago in reply to Titusrathinaraj Stalin

Intellectual 640 points

Hi Titus

i forgot to reply,

is working and it was de SW setup.

I have the static IP.
Now i want to use my mac Add so, Where do I set this mac Add because is using the mac from router.

regards

Nivaldo

0 Raja over 9 years ago in reply to Nivaldo T. Schiefler Jr.

TI__Guru* 81335 points

Hi Nivaldo,
Thank you for the update.

0 Titusrathinaraj Stalin over 9 years ago in reply to Nivaldo T. Schiefler Jr.

TI__Guru** 116100 points

Hi Nivaldo,
You have to change the SRC,DST MAC address in the following location.

C:\ti\pdk_C6678_1_1_2_6\packages\ti\transport\ndk\nimu\src\nimu_eth.c

Rebuild the NDK library.

Processors

Processors forum

Would like to set my IP number and don´t by router