Hi.
I want control the ili9341(8bit parallel) using by ebi interface.
How to setup the device tree and kernel config.
Here is my environment:
- linux-3.14.26-g2489c02
- u-boot-2014.07-g7e537bf
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi.
I want control the ili9341(8bit parallel) using by ebi interface.
How to setup the device tree and kernel config.
Here is my environment:
- linux-3.14.26-g2489c02
- u-boot-2014.07-g7e537bf
Hi,
The AM335X LCD controller can be used in LIDD mode for this purpose, but the Linux SDK does not include support for this mode of operation. You can refer to section 13 of the AM335X Technical Reference Manual Rev. L for description of LIDD mode, but you will need to write your own driver.
HI,
I want know the Linux SDK support lcd mode.
from your pinmux site:
24-bit Active (TNT) color
Passive (STN) Mono 8-bit
Passive (STN) color 8-bit
16-bit Active (TNT) color
Passive (STN) Mono 4-bit
LIDD Intel asynchronous 16-bit
LIDD Intel synchronous 16-bit
LIDD Mototola 68K 16-bit
LIDD Hitatchi 8-bit
LIDD Hitatchi 4-bit