PACKET TRANSMISSION BETWEEN PROCESSOR 1 AND PROCESSOR 2 IN TMS320C6678

KANCHI J

Hai

I am interested to transmit UDP packet from Core 0 of Processor 1 to Core 0 of Processor 2 over single TMS board.Please help me to configure QMSS for the same purpose

With Regards Kanchi

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Hi,
You can use the NDK examples code to transmit/receive the UDP/TCP packets to/from other C6678 board.

C:\ti\mcsdk_2_01_02_06\examples\ndk\helloWorld\evmc6678l

I have transferred and received the UDP packets to PC and from PC.
Just you can run the same NDK example code on other board with small change for sending UDP packet.

Please refer to the following E2E posts.

e2e.ti.com/.../1570476
e2e.ti.com/.../1495303

0 KANCHI J over 10 years ago in reply to Titusrathinaraj Stalin

Prodigy 90 points

Hai

Thanks for the reply..Will work it out

With regards Kanchi

Processors

Processors forum

PACKET TRANSMISSION BETWEEN PROCESSOR 1 AND PROCESSOR 2 IN TMS320C6678