AM3354 design based on 7.4V battery and one DDR3.

cnreddy jakkireddy

Other Parts Discussed in Thread: AM3354

Hi Team,

I am going to design a processor board , based on 7.4V /4000mAh (Li/poly) and one DDR3 with the help of AM3354 processor so please suggest me which parts should I use(for battery charging , PMIC ).

Looking for your valuable reply.

over 10 years ago

0 Biser Gatchev-XID over 10 years ago

TI__Guru**** 393215 points

Hi,

The PMICs that are recommended for AM335X designs can be found here: http://processors.wiki.ti.com/index.php/AM335x_Hardware_Design_Guide#Designing_the_Power_Subsystem

This forum supports only the Sitara processor family, therefore we cannot recommend battery charging circuits for your use case. I suggest you ask on one of the battery management forums: https://e2e.ti.com/support/power_management/battery_management/

0 cnreddy jakkireddy over 9 years ago in reply to Biser Gatchev-XID

Prodigy 30 points

Hi,

Thanking you for your suggestion.

Processors

Processors forum

AM3354 design based on 7.4V battery and one DDR3.