BeagleBone Black (rev C) Power Issue

Alex Nieto

Hello Everybody,

Yesterday I opened my BeagleBoneBlack (rev C) and started working with it

Today while I was trying accessing it trough SSH I got and error and then I realized all the leds were off.

Everytime I plug it back to the 5v adapter de PWR LED flash once and the BeagleBone doesn't boot

I've been doing some research and I've found this link that describes my problem.

Is there any other test that I should do?

Thanks in advance

0 Biser Gatchev-XID over 10 years ago

Hi Alex,

I suggest you contact your board provider for more information on how the board can be replaced/repaired.

0 Alex Nieto over 10 years ago in reply to Biser Gatchev-XID

Good Afternoon,

We got the board in te EU TIIC Contest 2015, so my provider is Texas Instruments, Am I wrong?

Thanks.

0 Biser Gatchev-XID over 9 years ago in reply to Alex Nieto

Here is a link to the TI e-store support. They should be able to help you: store.ti.com/contactus.aspx

Processors forum