Is the ADC device driver not supported in new Processor SDK 1.00.00.03?

Jeff Wong1

The post in link talked about ADC device driver:

https://e2e.ti.com/support/arm/sitara_arm/f/791/t/331372

With the new Processor for Sitara SDK 1.00.00.03, I don't find an option for ADC device driver on menuconfig any more. Do you know how to get an ADC device

driver for the new SDK?

Thanks

over 9 years ago

0 Brad Griffis over 9 years ago

TI__Guru*** 125430 points

I see it there. It's under Device Drivers -> Multifunction device drivers -> TI ADC / Touch Screen chip support. Be sure to specify "ARCH=arm" when you run the menuconfig step, i.e. "make ARCH=arm menuconfig".

0 Jeff Wong1 over 9 years ago in reply to Brad Griffis

Expert 1305 points

For simple and fast reason, whether there is a way to recover the original options of the kernel settings?
I originally only need a few modification on the menuconfig.
Can I copy from other 1.0.0.3 SDk installation .config to this host PC SDK path? Then, I change the a few options.
Thanks,

0 Jeff Wong1 over 9 years ago in reply to Jeff Wong1

Expert 1305 points

I find the default options are in am335x-evm_debug_defconfig.
Thanks

Processors

Processors forum

Is the ADC device driver not supported in new Processor SDK 1.00.00.03?