• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 98 subscribers
  • Views 444 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EVM 6678 Ethernet boot - how to convert a bin-file to a eth-file?

Manuel Berglez
Prodigy 70 points

Hello,

I am using an EVM 6678L. I did the simple-example and it works well.

In this example the out-file will be converted to an .eth-file to send it to the DSP.

But now my question: At my application,  I only have a binary file available, which refers to six out-files.

Can anyone tell me, if and how it is possible, to convert the binary-file to an eth-file?

Thanks

Regards Manuel

  • 0
    TI__Mastermind 28085 points

    Hi,

    Welcome to the TI E2E forum. I hope you will find many good answers here and in the TI.com documents and in the TI Wiki Pages (for processor issues). Be sure to search those for helpful information and to browse for the questions others may have asked on similar topics (e2e.ti.com).

    You have create a same thread on multiple times. So i close this thread.

    Thanks,