facing problem in LR-232 interfacing with dsk6713!!!

Hi,

What problem are you getting ?

The file "cdb" looks like its for DSP/BIOS 4.9.

How did you import the project ?
Using "Import legacy CCSv3.3" option ?

processors.wiki.ti.com/.../DSP_BIOS_FAQ
processors.wiki.ti.com/.../Migrating_from_BIOS_4.9_to_BIOS_5.x

Hi Hatim,

What problem exactly you are facing , is it the sample program is not building or at the time of execution/running you are facing issues.
If you are getting some errors, then share error logs with us.

Brother sample program is not building and i guess this might be caused of DSP bios configuration file...which is not supported by ccs v.5

I have imported as legacy CCS v3.3 option.

Hi Hatim,

Check-out below mentioned thread link,
e2e.ti.com/.../136794

Would you please elaborate, how LR-232 daughter cards works well with ccsv.5 for DSK 6713
thanks in advance..

Hi Hatim,
You are right.
It won't build it on CCSv5 unless you install and configure to DSB/BIOS properly.

You can post your questions related to CCSv5 since it is device forum where we handle device specific relates problems.
e2e.ti.com/.../81

Write a post with your CCS console build error logs etc.,

You can download the C6713 CSL packages from the following link.

http://www.ti.com/tool/sprc090

Any screen shot of that problem ?
Please elaborate it.

you mixed it brother i want to get access of EMIf space control registers and wants to edit their value as described in Application note shipped with cd of LR-232