DM360XX USB Driver

Avi Tal

Expert 1120 points

Dear Friends,

I am trying to boot DM368 LeopardBoard via USB.

Do you know where IO can find a Windows 7 64 bit driver for DM360XX?

Thanks,

Avi Tal.

over 9 years ago

0 Cvetolin Shulev-XID over 9 years ago

TI__Guru 65405 points

Hi Avi,

I suggest you as very first step of investigating the issue is to check the Boot up control switch configuration. This switch allows the user to selects the boot source. For details see Table 5 from Getting started guide for Leopard board at:
processors.wiki.ti.com/.../Getting_Started_Guide_for_Leopard_Board_DM365_and_DM368
When you have proper Boot up control switch configuration then you should connect the board to the PC.

BR
Tsvetolin Shulev

0 David Clark19 over 9 years ago in reply to Cvetolin Shulev-XID

Prodigy 10 points

I believe he was also asking about a driver for the DM360xx camera, any suggestions? I'm looking for a windows driver for that camera for a project.

Have a customer who is deaf needs to build a VRS system for use with Sorenson, wants to use the DM360XX camera, trying to find the windows driver and any info on it. Apparently it's based on TI tech.

0 Cvetolin Shulev-XID over 9 years ago in reply to David Clark19

TI__Guru 65405 points

Hi David,

I suggest you to ask about windows camera driver in the WinCE E2E forum at:

Tsvetolin Shulev

Processors

Processors forum

DM360XX USB Driver