DCC tool RAW Image Limitations

Navin Prashath

Hi,

What's the maximum resolution size that can be accepted by DCC?I tried to give 16MP image .The tool says the selected image is smaller than the currently raw image size.Image rejected.I'm trying to give this image as input for rgb2rgb plugin.

Regards,

Navinprashath.R.R

over 9 years ago

0 Margarita Gashova over 9 years ago

TI__Guru* 80190 points

Hello,

What is the software release that you are using here?

BR
Margarita

0 Navin Prashath over 9 years ago in reply to Margarita Gashova

Intellectual 760 points

Hi,
I'm using IPNC RDK3.8. DCC 3.0.1.

Regards
Navinprashath.R.R

0 Margarita Gashova over 9 years ago in reply to Navin Prashath

TI__Guru* 80190 points

Hello,

I will notify the IPNC team for help.

Margarita

0 Anand Kulkarni71405 over 9 years ago in reply to Margarita Gashova

TI__Expert 8920 points

Hi,

Pl. set the CUSTOM resolution in the RAW file properties (OPtions->Raw properties) window in the DCC tool.

regards,

Anand

0 Navin Prashath over 9 years ago in reply to Anand Kulkarni71405

Intellectual 760 points

Hi,

Thanks.Can I know whats the maximum resolution supported by DCC tool?

Regards,
Navinprashath.R.R

0 Anand Kulkarni71405 over 9 years ago in reply to Navin Prashath

TI__Expert 8920 points

Hi,

The limitation on the supported resolution is coming from the MATLAB array size restriction and the maximum resolution supported is about 7000x6000.
Pl. note that this information is arrived at with trial and error and is not documented.

regards,
Anand

0 Navin Prashath over 9 years ago in reply to Anand Kulkarni71405

Intellectual 760 points

Thanks and Regards,
Navinprashath.R.R

Processors

Processors forum

DCC tool RAW Image Limitations