Sampling of an Image using 6713

MOHAMMAD NASEER M N

Other Parts Discussed in Thread: OMAPL138

Dear sir,

for the university syllabus we have "Sampling of an Image".ca we do by using 6713 kit.....?

if so which all the external peripherals to be used along with the kit.....??if we do with dsk6713 alone.....please share me its code.....

thank u

over 10 years ago

0 Titusrathinaraj Stalin over 10 years ago

TI__Guru** 116100 points

Dear Mohammad,
I would like to suggest to check with your seniors or professors, anyone have tried this etc., which book we need to refer to get the sample for the same etc.,
Also you can search e2e threads, posts etc.,
I'm not aware about this example in C6713 but more familiar with C6748/OMAPL138 LCDK boards.

0 Arvind Singh over 10 years ago

Mastermind 6115 points

Hi,

Yes sampling of an image is possible but C6713 do not have a video port on the board.
Therefore any image capture device would require external hardware.

Below is the wiki for C6713 CSL and BSL based example projects.
processors.wiki.ti.com/.../C6713DSK_in_CCSv5

Processors

Processors forum

Sampling of an Image using 6713